P40 Pro+ User Guide-(ELS-N39,EMUI11.0_01,en-gb)

Table Of Contents
Once Do Not Disturb has been enabled, will display in the status bar. To check for
notications, go to the lock screen or swipe down from the status bar to open the
notication panel. Swipe left on a notication and touch to delay the notication.
When receiving incoming calls, notications, and messages, your device will be muted and
will not automatically turn on its screen or display banner notications.
Set a Schedule for Do Not Disturb
1 Go to Settings > Sounds & vibration > Do Not Disturb, and disable Do Not Disturb.
2 Enable Scheduled. Your device will enter Do not disturb mode at the specied time on
Saturdays and Sundays by default.
3 Touch Scheduled to set the time frame and repeat cycle.
4 You can also touch Add to set multiple start times.
Make Exceptions in Do Not Disturb Mode
While in Do Not Disturb mode, you can enable your device to ring for calls and messages
from certain sources so you don't miss anything important.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable Do Not Disturb or
Scheduled. Then you can:
Touch Calls or Messages and select one of the options. If you set an exception, your device
will ring for calls or messages from the selected source.
Once Repeated calls is enabled, a second call from the same number within 15 minutes
will not be silenced.
Biometrics & Password
Set Fingerprints
You can enrol a
ngerprint and then use it to unlock the screen and access your Safe, App
lock, and more.
Enrol a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and follow the instructions to
set or enter the lock screen password.
2 Touch New
ngerprint to begin enroling your ngerprint.
3 Place your ngertip on the ngerprint sensor. When you feel a vibration, lift your nger
then press again. Move your nger around to enrol dierent parts of it.
4 When the enrolment has been completed, touch OK.
You can now place your nger on the ngerprint sensor to unlock the screen.
Settings
155