P40 Pro+ User Guide-(ELS-N39,EMUI11.0_01,en-gb)

Touch to capture the measuring screen.
Measure Length
For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your device and
the object.
1 On the AR Measure screen, touch Length.
2 Frame the object in the viewnder and slowly move your device to locate the plane.
3 Point
at the object and touch to mark the starting point.
4 Move your device slowly so that travels along the edge of the object. When it reaches
the end of the edge, touch .
5 Your device will automatically display the result.
Drag the end point to ne-tune the measurement result.
Measure Area
Currently, only the area of rectangles can be measured.
1 On the AR Measure screen, touch Area.
2 Frame the object in the viewnder and slowly move your device to locate the plane.
3 When your device identies the object, a frame will appear. After the frame overlaps with
the object, touch .
4 Your device will automatically display the result.
Drag the end point to ne-tune the measurement result.
Measure Volume
• Currently, only the volume of cubes can be measured.
• Make sure the object is not placed against a wall. Ensure there is a distance of 1–1.5 m
(3.3–5 ft.) between your device and the object.
On the AR Measure screen, touch Volume. Both automatic and manual measurements are
allowed.
Automatic Volume Measurement
1 Ensure that Auto is turned on. Frame the object in the viewnder and slowly move your
device to locate the plane.
2 When your device identies the object and displays a frame, touch .
3 Your device will automatically display the result.
Drag the tips to ne-tune the measurement result.
Manual Volume Measurement
Smart Features
51