P40 Pro+ User Guide-(ELS-N39,EMUI11.0_01,en-gb)

1 Turn o Auto. Frame the object in the viewnder and slowly move your device to locate
the plane.
2 Point
at the tip of the object's bottom edge and touch to mark the starting
point.
3 Move your device slowly so that travels along the long edge of the object. When it
reaches the end of the edge, touch .
4 Move your device to create a frame for the object's bottom. When the frame overlaps with
the bottom plane, touch .
5 Move your device to create a frame for the whole object. After the frame overlaps with
the object, touch .
6 Your device will automatically display the result.
Drag the tips to ne-tune the measurement result.
Smart Remote
Use Your Device as a Remote Control
Your device uses infrared technology, allowing you to pair it with household appliances in the
Smart Remote app and use it to remotely control appliances such as TVs, air conditioners,
STBs, DVD players, cameras, projectors, and network boxes.
Add and Use a Remote Control
1 Go to Tools > Smart Remote >
, select the device type (such as TV, air conditioner,
STB, DVD player, camera, projector, or network box), and then the brand.
2 Point the infrared sensor on the top of your device at the household appliance, and follow
the onscreen instructions to add it to your remote control.
3 After adding the appliance, simply touch to control it remotely.
Set Up a Remote Control
1 Go to Tools > Smart Remote >
and touch .
2 Swipe through the remote control panels to select the one you want, and touch Go to
remote control panel.
3 Point the infrared sensor on the top of the device at the infrared sensor of a home
remote, keeping it at a distance of about 5 cm. Touch and hold a key on the device you
want to program for 2 seconds to start learning the operation. Hold your device and the
home remote steady during the process.
Smart Features
52