P40 Pro User Guide-(ELS-NX9,EMUI10.1_01,en-gb)

Table Of Contents
To measure the height of two or three people at the same time, get them to stand side
by side, then mark the feet of one subject as the starting point. Lift your device until your
subjects' faces have been identied, at which point their individual heights will be
displayed.
Measure Length
1 On the AR Measure screen, touch Length.
2 Frame the object in the
viewnder and slowly move your device to locate the plane.
3 Point at the object and touch to mark the starting point.
4 Move your device slowly so that travels along the edge of the object. When it reaches
the end of the edge, touch .
5 Your device will automatically display the object's length.
Drag the end point to ne-tune the measurement result.
Measure Area
Currently, only the area of rectangles can be measured.
1 On the AR Measure screen, touch Area.
2 Frame the object in the viewnder and slowly move your device to locate the plane.
3 When your device identies the object, a frame will appear. After the frame overlaps with
the object, touch .
4 Your device will automatically display the result.
Drag the end point to
ne-tune the measurement result.
Measure Volume
Currently, only the volume of cubes can be measured.
On the AR Measure screen, touch Volume. Both automatic and manual measurements are
allowed.
Make sure the object is not placed against a wall. Keep a 1–1.5 m (39–59 in.) distance
between your device and the object.
Automatic Volume Measurement
1 Ensure that Auto is turned on. Frame the object in the
viewnder and slowly move your
device to locate the plane.
2 When your device
identies the object and displays a frame, touch .
3 Your device will automatically display the result.
Drag the frame to ne-tune the measurement result.
Manual Volume Measurement
Smart Features
57