P40 Pro User Guide-(ELS-NX9,EMUI12.0_01,en-gb)

3 Move your device to point at one end of the object and touch to add a starting
point.
4 Move your device slowly so that travels along the edge of the object until it reaches
the end. Touch
to complete the measurement.
5 Your device will automatically display the result.
Drag the end points to
ne-tune the measurement result.
For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your device and
the object.
Measure Area
Currently, only the area of rectangles can be measured.
1 On the AR Measure screen, go to Objects > or touch Area.
2 Frame the surface on which the object is resting in the viewnder and slowly move your
device to locate the plane.
3 When your device
identies the plane of the object, it will automatically display a frame
that matches the size of the plane. When the frame matches the size of the plane, touch
.
4 Your device will automatically display the result.
Drag the tips of the object to
ne-tune the measurement result.
Measure Volume
On the AR Measure screen, go to Objects >
or touch Volume. Both automatic and
manual measurements are supported.
• If the icon cannot be found in the viewnder, it means that your device does not
support automatic volume measurements.
• Currently, only the volume of cubes and cuboids can be measured.
• Make sure the object is not placed against a wall and there is a distance of 1 to 1.5 m
(3.3 to 5 ft.) between your device and the object.
Manually measure volume
1 If your device supports automatic measurements, touch
to disable auto mode rst.
Frame the surface on which the object is resting in the viewnder and slowly move your
device to locate the plane.
2 When the plane is identied, move your device to point at the object's bottom edge
and touch to add a starting point.
Smart Features
52