TalkBand B6 Online Help-(FDS-B19,01,en)
Table Of Contents
- Contents
- 1 Getting Started
- 1.1 Powering on, Powering off, and Restarting
- 1.2 Charging your band
- 1.3 Removing and replacing the ear tip
- 1.4 Adjusting or Replacing the band's strap
- 1.5 Wearing your band
- 1.6 Pairing the band with the phone
- 1.7 Buttons and gestures
- 1.8 Setting the time zone and language
- 1.9 Setting dual time zones
- 1.10 Checking the band's version
- 1.11 Updating your band
- 1.12 Viewing the Bluetooth name, MAC address, and Serial Number
- 1.13 Resetting the band to factory settings
- 1.14 Supported features when the band is connected to different phones
- 1.15 Supported features when the band is not paired with any phones
- 1.16 Water and dust resistance level
- 2 Application management
- 2.1 Do Not Disturb
- 2.2 Using the Stopwatch
- 2.3 Using the Timer
- 2.4 Using the Flashlight
- 2.5 Setting an alarm
- 2.6 Turning the screen on and off
- 2.7 Adding favorites
- 2.8 Managing watch faces
- 2.9 Setting vibration strength
- 2.10 Receiving weather reports
- 2.11 Find My Phone
- 2.12 Controlling music playback
- 2.13 Remote camera shutter
- 2.14 Managing dual phones
- 3 Bluetooth calling
- 4 Workout monitoring
- 5 Health management
- 6 Notifications
NO TE
● Your band can only be paired with phones running Android 4.4 or later, or iOS 9.0 or
later. Make sure that you have enabled Bluetooth on your phone before starting pairing.
● HwSynergy is supported with Huawei phones that run EMUI 8.1 or later. After you touch
PAIR in the Huawei Health app, you will be prompted with a dialog box indicating that
the phone supports HwSynergy.
● After the band is paired with the phone, swipe down on the phone's status bar or go to
Settings > Bluetooth on your phone. You will then see the band's Bluetooth name.
● When you turn on your band for the rst time or pair it with your phone after a factory
reset, you will be prompted to select a language before pairing. After both devices are
paired, the language on your band will be consistent with that on the phone.
● For Android users:
a. Download the latest version of the Huawei Health app from AppGallery.
b. Open the Huawei Health app, go to Devices > ADD > Smart Band, then
select your band's name.
c. Touch PAIR, touch the correct Bluetooth name, and the band and the
phone will connect automatically.
d. Your band will vibrate when it receives a pairing request. Touch to
conrm pairing.
NO TE
● Your band screen will display an icon when the pairing is complete. It will
take about 2 seconds to sync important information from your phone (such
as date and time).
● Your band screen will display a
dierent icon to inform you that the pairing
has failed and will then return to the startup screen 2 seconds later.
● For iOS users:
a. Search for "Huawei Health" in App Store and install the app.
b. Select the band you want to pair in the Bluetooth list in Settings.
c. Open the Huawei Health app, touch Device, touch the + in the top-right
corner, touch Smart Band, and select your band's name.
d. Select the correct name of your Bluetooth device. The band and the
phone will then pair automatically.
e. Your band will vibrate when it receives a pairing request. Touch
to conrm pairing.
HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help 1 Getting Started
Issue 01 (2020-07-31) Copyright © Huawei Technologies Co., Ltd. 8