TalkBand B6 Online Help-(FDS-B19,01,en)
Table Of Contents
- Contents
- 1 Getting Started
- 1.1 Powering on, Powering off, and Restarting
- 1.2 Charging your band
- 1.3 Removing and replacing the ear tip
- 1.4 Adjusting or Replacing the band's strap
- 1.5 Wearing your band
- 1.6 Pairing the band with the phone
- 1.7 Buttons and gestures
- 1.8 Setting the time zone and language
- 1.9 Setting dual time zones
- 1.10 Checking the band's version
- 1.11 Updating your band
- 1.12 Viewing the Bluetooth name, MAC address, and Serial Number
- 1.13 Resetting the band to factory settings
- 1.14 Supported features when the band is connected to different phones
- 1.15 Supported features when the band is not paired with any phones
- 1.16 Water and dust resistance level
- 2 Application management
- 2.1 Do Not Disturb
- 2.2 Using the Stopwatch
- 2.3 Using the Timer
- 2.4 Using the Flashlight
- 2.5 Setting an alarm
- 2.6 Turning the screen on and off
- 2.7 Adding favorites
- 2.8 Managing watch faces
- 2.9 Setting vibration strength
- 2.10 Receiving weather reports
- 2.11 Find My Phone
- 2.12 Controlling music playback
- 2.13 Remote camera shutter
- 2.14 Managing dual phones
- 3 Bluetooth calling
- 4 Workout monitoring
- 5 Health management
- 6 Notifications
2. Set the alarm time and repeat cycle then touch OK. If you do not set the
repeat cycle, the alarm is a one-time alarm by default.
3. Touch set alarm to modify the alarm time, repeat cycle, or delete the alarm.
You can only delete event alarms.
Method 2: Set a smart or event alarm using the Huawei Health app.
Setting a smart alarm:
1. Open the Huawei Health app, enter the device settings screen, go to Alarm >
SMART ALARM.
2. Set the alarm time, smart wakeup time, and repeat cycle.
3. Touch √ in the top-right corner (Android devices) or Save (iOS devices).
4. Swipe down on the Huawei Health app's home screen to ensure the alarm is
synced to the band.
5. Touch an alarm you have set to modify the alarm time, smart wakeup time,
and repeat cycle.
Set an event alarm:
1. Open the Huawei Health app, enter the device settings screen, go to Alarm >
EVENT ALARMS.
2. Touch Add to set the alarm time, smart wakeup time, and repeat cycle.
3. Touch √ in the top-right corner (Android devices) or Save (iOS devices).
4. Swipe down on the Huawei Health app's home screen to ensure the alarm is
synced to the band.
5. Touch set alarm to modify the alarm time, repeat cycle, or delete the alarm.
NO TE
● Event alarms are synced between the band and the Huawei Health app.
● There is only one smart alarm by default. You cannot add more or delete the smart
alarm. You can set a maximum of
ve event alarms.
● The smart alarm may vibrate in advance if it detects that you woke up before the alarm
is set to go
o using HUAWEI TruSleep
TM
. If HUAWEI TruSleep
TM
isn't enabled, the
smart alarm will vibrate in advance if it detects that you are no longer in deep sleep or
already awake.
● When the alarm vibrates, touch , swipe right or press the side button of the
band to snooze (for 10 minutes). Touch to stop the alarm. The alarm will
stop on its own after being snoozed three times and no other operation has been
performed for one minute.
● Currently, only alarms set on phones that run EMUI 8.1/Magic UI 2.0 or later can be
synced to the band.
2.6 Turning the screen on and
o
Using Raise to wake: Open the Huawei Health app, go to the device settings
screen, enable or disable Raise to wake.
Adjusting the screen brightness level: On your band, go to Settings > Display >
Brightness, and set your preferred screen brightness level.
HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help 2 Application management
Issue 01 (2020-07-31) Copyright © Huawei Technologies Co., Ltd. 16