TalkBand B6 Online Help-(FDS-B19,01,en)
Table Of Contents
- Contents
- 1 Getting Started
- 1.1 Powering on, Powering off, and Restarting
- 1.2 Charging your band
- 1.3 Removing and replacing the ear tip
- 1.4 Adjusting or Replacing the band's strap
- 1.5 Wearing your band
- 1.6 Pairing the band with the phone
- 1.7 Buttons and gestures
- 1.8 Setting the time zone and language
- 1.9 Setting dual time zones
- 1.10 Checking the band's version
- 1.11 Updating your band
- 1.12 Viewing the Bluetooth name, MAC address, and Serial Number
- 1.13 Resetting the band to factory settings
- 1.14 Supported features when the band is connected to different phones
- 1.15 Supported features when the band is not paired with any phones
- 1.16 Water and dust resistance level
- 2 Application management
- 2.1 Do Not Disturb
- 2.2 Using the Stopwatch
- 2.3 Using the Timer
- 2.4 Using the Flashlight
- 2.5 Setting an alarm
- 2.6 Turning the screen on and off
- 2.7 Adding favorites
- 2.8 Managing watch faces
- 2.9 Setting vibration strength
- 2.10 Receiving weather reports
- 2.11 Find My Phone
- 2.12 Controlling music playback
- 2.13 Remote camera shutter
- 2.14 Managing dual phones
- 3 Bluetooth calling
- 4 Workout monitoring
- 5 Health management
- 6 Notifications
3. Touch the band screen to take photos. Swipe right on the screen or press the
side button of the band to close Camera.
NO TE
This feature is only available when paired to a phone with EMUI 8.1.
2.14 Managing dual phones
After the watch is connected to two phones at the same time, you can use the
band to answer phone calls and listen to media playback. You can sync data and
notications from the phone that is connected to the band using the Huawei
Health app.
Connecting to dual phones
Method 1: Connect to two phones using your band
1. On your band, go to Settings > System > Connect, then touch Disconnect.
You will then be prompted with XX is in the discoverable state (XX stands
for the Bluetooth name of the band).
2. On the phone, go to Settings > Bluetooth > AVAILABLE DEVICES then touch
the Bluetooth name of the band.
– If the band has been paired with a phone using the Huawei Health app,
you will be prompted with a message on your phone asking to establish a
Bluetooth connection. At the same time, the band will vibrate and display
the phone model.
– If the band hasn't been paired with a phone, open the Huawei Health
app, go to Devices > ADD, then add your device and start the pairing.
3. Then touch Pair on your phone and touch
on the band screen to
nish the pairing.
Method 2: Connect to two phones using the Huawei Health app
1. Open the Huawei Health app, go to the device settings screen, touch Settings
> Dual phone pairing, then touch Pair another phone.
2. On the phone, go to Settings > Bluetooth > AVAILABLE DEVICES then touch
the Bluetooth name of the band.
A dialog box will pop up on the phone screen asking to establish a Bluetooth
connection. At the same time, your band will vibrate and display the phone
model.
3. Then touch Pair on your phone and touch
on the band screen to
nish the pairing.
Viewing paired phones
● On your band, go to Settings > System > Connect. You can then view phones
that have been paired with the band.
HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help 2 Application management
Issue 01 (2020-07-31) Copyright © Huawei Technologies Co., Ltd. 20