TalkBand B6 Online Help-(FDS-B19,01,en)
Table Of Contents
- Contents
- 1 Getting Started
- 1.1 Powering on, Powering off, and Restarting
- 1.2 Charging your band
- 1.3 Removing and replacing the ear tip
- 1.4 Adjusting or Replacing the band's strap
- 1.5 Wearing your band
- 1.6 Pairing the band with the phone
- 1.7 Buttons and gestures
- 1.8 Setting the time zone and language
- 1.9 Setting dual time zones
- 1.10 Checking the band's version
- 1.11 Updating your band
- 1.12 Viewing the Bluetooth name, MAC address, and Serial Number
- 1.13 Resetting the band to factory settings
- 1.14 Supported features when the band is connected to different phones
- 1.15 Supported features when the band is not paired with any phones
- 1.16 Water and dust resistance level
- 2 Application management
- 2.1 Do Not Disturb
- 2.2 Using the Stopwatch
- 2.3 Using the Timer
- 2.4 Using the Flashlight
- 2.5 Setting an alarm
- 2.6 Turning the screen on and off
- 2.7 Adding favorites
- 2.8 Managing watch faces
- 2.9 Setting vibration strength
- 2.10 Receiving weather reports
- 2.11 Find My Phone
- 2.12 Controlling music playback
- 2.13 Remote camera shutter
- 2.14 Managing dual phones
- 3 Bluetooth calling
- 4 Workout monitoring
- 5 Health management
- 6 Notifications
5.4 Low heart rate alert
If you don't move or fall asleep for 30 minutes and your heart rate stays lower
than the set low heart rate for more than 10 minutes, your band will vibrate once
and display the low heart rate alert. Swipe right or press the side button to clear
the reminder.
Perform the following to set your low heart rate limit:
1. Open the Huawei Health app, go to the device settings screen, then touch
Health monitoring > Continuous heart rate monitoring, then enable
Continuous heart rate monitoring.
2. Touch Low heart rate alert then set your preferred low heart rate.
NO TE
● You can set the low heart rate value to 40 bpm, 45 bpm, or 50 bpm.
● This feature is only available on Android phones.
5.5 Measuring blood oxygen levels (SpO
2
)
On your band, enter the app list, touch SpO
2
and start a SpO
2
measurement.
When Retest is displayed on the screen, it indicates that the measurement is
complete.
NO TE
● This function may not be supported in your country, please contract ocial service
center to get more details.
● The reading will be interrupted if you swipe right on the band screen, receive an
incoming call, or an alarm goes o.
● For a more accurate result, it is recommended that you wait three to ve minutes after
putting your band on to measure your SpO
2
.
● Keep still and wear your band a little bit tightly during the measurement, but avoid it
from coming into contact with the joint. Ensure that the heart rate sensor is in touch
with the skin and there are no foreign objects between your skin and the band. Make
sure the band screen is facing up.
● During the measurement, the band will also measure your heart rate.
● This measurement may also be
aected by some external factors such as low ambient
temperatures, arm movement, or if you have tattoos on your arm.
● The measurement results are for reference only and are not intended for medical use.
5.6 Testing stress levels
Enable Automatic stress test: Open the Huawei Health app, go to the device
settings screen, go to Health monitoring > Automatic stress test, then enable
Automatic stress test.
Viewing stress data: On your band, enter the app list and touch Stress to view
your stress level and the percentages occupied by
dierent stress levels.
HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help 5 Health management
Issue 01 (2020-07-31) Copyright © Huawei Technologies Co., Ltd. 31