HUAWEI HG655d Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI HG655d Home Gateway V100R001 User Guide Issue 02 Date 2010-11-27 Part Number 202304 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: terminal@huawei.
Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Contents 1 Warnings and Precautions ....................................................................... 1 2 Product Overview ..................................................................................... 6 2.1 Indicators......................................................................................................6 2.2 Interfaces and Buttons..................................................................................8 3 Product Installation and Getting Started........................
7.2 Enabling or Disabling the Wireless Network Function ..............................19 7.3 Changing the Wireless Network Name and the Access Password .............20 7.4 Changing the Login IP Address .................................................................20 7.5 Downloading Files Through the USB Port.................................................21 7.6 Restoring Default Settings..........................................................................21 8 FAQs..................................
1 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements z During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. z Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.
Precautions for Using Wireless Devices z When using the device, ensure that the antenna of the device is at least 20 cm away from all persons. z Do not use the device where using wireless devices is prohibited or may cause interference or danger. z The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device.
Maintenance z If the device is not used for a long time, power it off, and then remove all the cables connected to it. z If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. z Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunction of the device.
EU Regulatory Conformance This device should be installed and operated with a minimum distance of 20 cm between the antenna and all persons. Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред съответства на основните изисквания и другите разпоредби на Директива 1999/5/EC. Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se základními požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC. Dansk: Huawei Technologies Co., Ltd.
Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas 1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem. Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas. Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu konformi mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva 1999/5/KE.
2 Product Overview 2.1 Indicators Figure 2-1 Indicators on the front panel Table 2-1 Description of the indicators Indicator Status POWER On The HG655d is powered on. Off The HG655d is powered off. On The DSL connection is established and activated. Blinking The DSL connection is being activated. Off The HG655d is powered off or faulty.
Indicator Status Description INTERNET On The WAN connection is successfully established but no data is being transmitted. Blinking The WAN connection is successfully established and data is being transmitted. Off The HG655d is powered off or the WAN connection is not yet established. On The LAN connection is successfully established but no data is being transmitted. Blinking The LAN connection is successfully established and data is being transmitted.
2.2 Interfaces and Buttons Figure 2-2 Interfaces and buttons Table 2-2 Description of the interfaces and buttons Interface/Button Function DSL Connects to the MODEM interface on the splitter. LINE Connects to the PHONE interface on the splitter. PHONE1, PHONE2 Connects a phone. LAN1–LAN4 Connect PCs, switches, or other equipment.
3 Product Installation and Getting Started 3.1 Selecting the Installation Position If you need to use the WLAN function of the HG655d, pay attention to the following requirements when selecting the installation position of the HG655d: z Obstacles, such as cement walls and wooden plate walls, would affect the radio signal propagation effect of wireless networks.
3.2 Connecting the Cables Before connecting the cables, power off all equipment connected to it including the HG655d, the PC, and the switch. Figure 3-1 Cable connection 1 4 Phone jack on the wall Set-top box 2 5 Splitter PC 3 6 Telephone Power adapter 3.3 Getting Started To power on the HG655d, press the ON/OFF button on the rear panel of the HG655d. After you power on the HG655d, the DSL indicator blinks (for less than three minutes), which indicates that the HG655d is being activated.
4 Setting the Internet Access Parameters The HG655d supports VDSL2 uplink and High-Speed Packet Access (HSPA) uplink through Huawei HSPA data card. You can access the Internet through the DSL link and HSPA link. 4.1 Configuring the HSPA uplink When the HG655d is working through the Huawei HSPA data card, you need to install the Huawei HSPA data card on the HG655d. To create a HSPA uplink connection, do as follows. Step 1 Setting the WAN Parameters. 1. Launch the Internet Explorer and enter http://192.168.
z Using the PPP Dial-Up Software on Your Computer Using the Embedded PPP Dial-Up Software on the HG655d If you select this method for accessing the network, the HG655d starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. To configure the HG655d and your computer for the network access, do as follows: Step 1 Log in to the web page. Step 2 Configure the PTM PVC and ATM PVC. 1. In the navigation tree, choose Basic > ATM. 2.
Using the PPP Dial-Up Software on Your Computer If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In addition, you need to perform dial-up operations on your computer upon each startup. To configure the HG655d and your computer for the network access, do as follows: Step 1 Set the working mode of the HG655d to Bridge.
5 Configuring the Wireless Connection If a wireless network adapter is installed on your computer, you can connect you computer to the HG655d through a wireless connection. The hardware installation methods and driver installation methods of wireless network adapters provided by different companies vary from each other. For details, see the installation guide provided by the wireless network adapter provider. 5.
For details, see the user guide of your network adapter. z Use the wireless configuration software provided by the operating system of your PC. If your PC runs on Windows XP, you can use the Wireless Zero Configuration that is provided by Windows XP to set up a wireless connection between your PC and the HG655d. Takes Windows XP as an example, to set up a wireless connection, do as follows: Step 1 Enable the wireless network function, and set the wireless network name and access password of the HG655d.
6. In the Wireless Network Connection dialog box, select the WLAN with the same name that is configured in Step 1, and then click Connect in the lower right corner of the window. 7. In the displayed dialog box, enter the access password that is preset in Step 1, and then click Connect. After the password is authenticated, Connected is displayed in the upper right corner of the WLAN icon in the WLAN list, indicating that a wireless connection is set up between you PC and the HG655d. 8.
6 Setting the VoIP Parameters 6.1 Voice Service Introduction The HG655d supports voice services based on the Session Initiation Protocol (SIP). The SIP is an application layer protocol used to create, modify, or end multimedia sessions. The HG655d enables voice service interworking between the Internet and the Public Switched Telephone Network (PSTN). 6.2 Networking Figure 6-1 shows the network model of voice services.
Table 6-1 Description of the equipment in voice service networking No. Item Description 1 Proxy Server A server that forwards requests or responses in place of the client 2 Registrar Server A server that receives registration requests 3 BRAS Broadband Remote Access Server 4 DSLAM Digital Subscriber Line Access Multiplexer 5 HG655d - 6 Telephone - 7 Computer - 6.3 Configuration Procedure The VoIP parameter has been configured with the delivered HG655d.
7 Configuring the Basic Settings 7.1 Changing the Administrator Password For safety reasons or to make the password easy to remember, you can change the administrator password for login after logging in to the web page. To change the password, do as follows: Step 1 Log in to the web page. Step 2 Choose Maintenance > Account in the navigation tree to display the system management page. Step 3 Select admin from the User name drop-down combo box. Step 4 Enter the Current password and the New password.
Step 2 In the navigation tree on the left, choose Basic > WLAN. Step 3 Select or not select the Enable WLAN option. Step 4 Click Submit to save the settings. 7.3 Changing the Wireless Network Name and the Access Password To change the name and access password for the wireless network, do as follows (taking the authentication type WPA-PSK as an example): Step 1 Log in to the web page. Step 2 In the navigation tree on the left, choose Basic > WLAN.
7.5 Downloading Files Through the USB Port After a portable storage device is connected to the USB port on the rear panel of the HG655d, you can configure the HG655d as a File Transfer Protocol (FTP) client. Through the HG655d, the files on the FTP server can be downloaded to the removable storage device. To download files through the HG655d, do as follows: Step 1 Choose Advanced > USB Port. Step 2 In the User name and Password text boxes, enter the user name and the password.
8 FAQs How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over one second, and then release the button to enable or disable the wireless network function. The WLAN indicator shows whether the wireless network function is enabled. How can I quickly restore the default settings of the terminal? To restore the default settings, press and hold the RESET button on the rear panel for over six seconds after the HG655d is powered on, and then release the button.
1. Ensure that the network adapter of the computer is enabled. 2. Ensure that the network cable between the terminal and the computer is properly connected. Remove and then insert the network cable or replace the network cable when necessary. If the LAN indicator is still off, contact an authorized maintenance center. Step 4 Check whether the driver for the network adapter is properly installed. Take a computer that runs Windows XP as an example.
Settings dialog box, ensure that the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). check box is cleared. Step 8 Try to access multiple Web sites to check whether the terminal can access these Web sites. If the terminal still cannot access Web sites, contact your network service provider.
After a broadband terminal is installed, does Internet access degrade call quality or do telephone calls lower the Internet access rate? No. The terminal uses the frequency division multiplexing (FDM) and splitter technologies to separate voice signals from data signals. Although the two types of signals are transmitted through one telephone line, they are carried by different frequency bands. Therefore, they do not interfere with each other.
9 Appendix 9.1 Default Settings Parameter Setting IP address of the LAN interface 192.168.1.1 Subnet mask of the LAN interface 255.255.255.0 User name used for logging in to the web page admin Password used for logging in to the web page admin DHCP server function Enable Wireless network function Enable 9.2 Technical Specifications Item Specification Power supply 12 V DC, 1.
Item Specification Standards VDSL2 standards G.993.2 Annex B PSD Mask ITU G.994.1 (G.hs) ADSL2+ standard ITU G.992.5 (G.dmt.bitplus) Annex A ADSL2 standards ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.3 (G.dmt.bis) Annex L ADSL standards ITU G.992.1 (G.dmt) Annex A ITU G.994.1 (G.lite) ANSI T1.413 Issue 2 WLAN standard 802.11b, 802.11g and 802.11n(2.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.
