Band 7 User Guide-(LEA-B19,01,en-us)

Remove the strap: Push the springbar lever on the strap, tilt the strap outwards and remove
it from the link xing slot.
Install the strap: Align the springbar pin with the link xing slot, push the springbar lever to
make its pin into the device body and install the strap.
Removing and installing the strap of a Band 6 Series device
Strap replacement: Carefully remove the fastener to take o the strap. Perform the steps in
reverse to attach a strap to the device's body. Make sure that the device's body ts tightly in
the strap before removing the fastener.
Removal method 1: Remove the fastener from the back of the strap and pull down the strap
to separate it from the device's body.
Removal method 2: Remove the fastener from the back of the strap and rotate and pull the
strap from the buckles on both sides of the strap to separate the strap from the device's
body.
More
21