PORSCHE DESIGN Mate 30 RS User Guide-(LIO-N29,EMUI11.0_01,en)

Settings
Wi-Fi
Transfer Data Using Wi-Fi Direct
You can use Wi-Fi Direct to transfer data between Huawei devices. Wi-Fi Direct allows you to
transfer large
les to a nearby device more quickly than Bluetooth and without having to pair
the devices.
1 On the receiving device, go to Settings > Wi-Fi and enable Wi-Fi.
2 Then go to More settings > Wi-Fi Direct to start searching for nearby devices that have
enabledWi-Fi Direct.
3 On the sending device, touch and hold to select the les you want to share, touch ,
and select Wi-Fi Direct.
These steps may be dierent if you are sharing les directly from an app.
4 Touch the icon of the receiving device to establish a connection, then share the les.
5 On the receiving device, accept the Wi-Fi Direct transfer request.
Then go to Files to view the received les.
Select a Network Using Wi-Fi+
When Wi-Fi+ is enabled, if your phone detects a Wi-Fi network that it has previously
connected to or is free, it will automatically enable Wi-Fi and connect to the network. Your
phone will also evaluate the quality of the current Wi-Fi network and switch to mobile data
if the Wi-Fi signal is poor.
1 Go to Settings > Wi-Fi.
2 Touch More settings and enable or disable Wi-Fi+.
Introduction to Wi-Fi
Connecting to the Internet over Wi-Fi is an
eective way to save mobile data. You can also
enable Wi-Fi security monitoring to avoid risky hotspots and ensure safe Internet access.
Connect to a Wi-Fi Network
Be extra careful when connecting to a free public Wi-Fi hotspot to avoid security risks
and nancial losses resulting from the leakage of your personal data.
1 Go to Settings > Wi-Fi, and enable Wi-Fi.
2 Connect to a Wi-Fi network on the Wi-Fi screen using either of the following methods:
• Select a Wi-Fi network to connect to under Available networks. A password is
required for encrypted networks.
124