PORSCHE DESIGN Mate 30 RS User Guide-(LIO-N29,EMUI11.0_01,en)

Table Of Contents
Charging Your Phone with a PC
1 Connect your phone to a PC or other device using a USB cable.
2 When the Use USB to dialog box is displayed on your phone, touch Charge only.
If another option has been set previously, the dialog box will not pop up. Swipe down
from the status bar to open the
notication panel, touch Settings, then select Charge
only.
Overview of Battery Icons
You can check the battery level from the battery icon on the phone screen.
Battery Icon Battery Level
Less than 4% battery remaining.
Charging, less than 10% battery remaining.
Charging, 10% to 90% battery remaining.
Charging, at least 90% battery remaining.
If 100% is displayed next to the battery icon, or a charging complete
message is displayed on the lock screen, the battery is fully charged.
Use Wireless Reverse Charging
Wireless reverse charging is supported by devices that support the Wireless Charging
Standard, such as phones, tablets, watches, and bands.
Before using wireless reverse charging, ensure that the battery level of your phone is higher
than 20%.
1 Go to Settings > Battery, and enable Wireless reverse charging.
2 Power on the device to be charged, and place it on the center of the back of your phone.
Do not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within 5 seconds, adjust its position and try again.
4 If the device to be charged is removed from the phone for more than 2 minutes during
charging, Wireless reverse charging will automatically be disabled.
Reverse Charge with an OTG Cable
On-The-Go (OTG) is a USB transmission technology that allows a phone to directly access
les on a USB ash drive or digital camera, or connect to an external device such as a
keyboard or mouse, with the help of an OTG cable.
You can use your phone to charge other devices using an OTG cable.
1 Connect your phone with the device to be charged using an OTG cable.
Essentials
19