PORSCHE DESIGN Mate 30 RS User Guide-(LIO-N29,EMUI11.0_01,en)

1 Open the Tools folder on the home screen, then touch AR Measure.
2 On the AR Measure screen, touch Height.
3 Frame the subject's feet in the viewnder and slowly move your phone to locate the
plane.
4 Point
at the subject's feet and touch to mark the starting point.
5 Slowly lift your phone to include the subject's entire body in the viewnder. When the
subject's face is identied, your phone will automatically display the subject's height.
Drag the end point to ne-tune the measurement result.
Touch to capture the measuring screen.
Measure Length
For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your phone and
the object.
1 On the AR Measure screen, touch Length.
2 Frame the object in the viewnder and slowly move your phone to locate the plane.
3 Point
at the object and touch to mark the starting point.
4 Move your phone slowly so that travels along the edge of the object. When it reaches
the end of the edge, touch .
5 Your phone will automatically display the result.
Drag the end point to ne-tune the measurement result.
Measure Area
Currently, only the area of rectangles can be measured.
1 On the AR Measure screen, touch Area.
2 Frame the object in the viewnder and slowly move your phone to locate the plane.
3 When your phone identies the object, a frame will appear. After the frame overlaps with
the object, touch .
4 Your phone will automatically display the result.
Drag the end point to ne-tune the measurement result.
Measure Volume
• Currently, only the volume of cubes can be measured.
• Make sure the object is not placed against a wall. Ensure there is a distance of 1–1.5 m
(3.3–5 ft.) between your phone and the object.
On the AR Measure screen, touch Volume. Both automatic and manual measurements are
allowed.
Smart Features
49