Mate20 Pro User Guide-(LYA-L09&L29,EMUI10.0_01,EN-GB)

3 If the VPN server does not have a DNS address, touch Show advanced options and enter
the DNS domain, DNS server address, and forwarding route.
4 Touch Save.
5 Touch the VPN you have just set up, enter your VPN user name and password, then touch
Connect.
Sounds & Vibration
Vibrate Mode and More Sound Settings
1 Go to
Settings > Sounds & vibration, and enable or disable Vibrate in silent mode
according to your preferences.
2 Touch More sound settings. Then you can set the sound for the following items:
• Keypad tones
• Screen lock
• Screenshot
• Screen touch
• Vibrate on touch
• Startup sound
Do Not Disturb
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner
notications will not be displayed.
Enable or Disable Do Not Disturb Mode
You can enable or disable Do Not Disturb using either of the following methods:
• Swipe down from the status bar to open the notication panel, then swipe down on it
again to show all shortcuts. Touch to enable or disable Do Not Disturb. You can touch
and hold
to access the Do Not Disturb settings screen.
• Go to Settings > Sounds & vibration > Do Not Disturb, and enable or disable Do Not
Disturb.
Once Do Not Disturb is enabled, will be displayed in the status bar, calls and messages
will be muted, and banner notications will not be displayed.
Set a Schedule for Do Not Disturb Mode
Go to
Settings > Sounds & vibration > Do Not Disturb, touch Scheduled, set the time
period and repeat cycle, then enable Scheduled.
Settings
115