User Guide

Hold your device steady when shooting: In Pro mode, touch and enable Horizontal level.
After this feature is enabled, two horizontal guiding lines will appear in the viewnder. When the
dotted line overlaps with the solid line, it indicates that the camera is horizontally aligned.
l Some settings in Pro mode may change after you change a setting. You may adjust them based
on your actual needs.
l The recommended settings above are for reference only. You may adjust them based on the
actual condition to achieve your desired effect.
Use Pro Mode to Take Portraits
Want to take more professional portraits? Pro mode allows you to adjust your camera settings to
shoot professional-level portraits.
Go to Camera > More > Pro to enable Pro mode.
Select a Metering mode: or is recommended for taking portraits. Line up your subjects
(their faces for example) so they are in the center of the
viewnder. Then touch to select your
desired Metering mode.
Adjust brightness based on the ambient light
l Adjust ISO: To avoid excessive noises, it is recommended that you use a lower ISO when taking
portraits. You should also adjust the ISO based on the actual lighting conditions. To do this, touch
, and slide it left or right to adjust the value.
Good for
Recommended ISO
Outdoors Between 100 and 200
Indoors Around 400
Night scenes Between 400 and 800
l Adjust shutter speed: Choose a slower shutter speed if the ambient light is low and a faster one
when it's stronger. The recommended shutter speed for static portraits is between 1/80 and 1/125.
To shoot moving subjects, select a shutter speed of 1/125 or above. Touch (shutter speed),
slide until your desired speed is in the center.
l Adjust EV compensation: Increase the EV compensation if the subjects or background is in dim
light, and decrease the EV compensation if the light is strong. Touch
(9
, and slide until the desired
value is in the center.
Adjust AWB: Select AWB depending on the lighting conditions. When shooting in sunlight, you can
select
, and for gloomy days, select . Touch
"8#
, and slide until the desired value is in the
center.
Camera
46