User manual

Table Of Contents
2 Select a call for
warding mode and turn on the corresponding switch.
Call forwarding between two SIM cards will be enabled when it is congured for both SIM
cards.
Quickly Switch the Default Mobile Data SIM
If two SIM cards have been installed on your phone, you can use a shortcut to quickly switch
the default mobile data SIM card.
1 Swipe down from the status bar to open the notication panel, then swipe down again to
show all shortcuts. T
urn on Mobile data.
2 Touch the text under
until a prompt is displayed, then select a SIM card and touch
OK.
When the prompt is displayed, touch Sett
ings to access the SIM management screen.
eSIM
Embedded-SIM (eSIM) is a virtual SIM card that can be used instead of a phy
sical SIM card.
An eSIM card works in the same way as a physical SIM card, but occupies no space and can
be linked with multiple card numbers. You are free to switch between carriers to nd the best
deal for y
ou.
This feature may vary depending on your carrier.
This f
eature is only available in some countries and regions.
This feature may vary by device.
Apply for an eSIM Card
Contact y
our carrier to appl
y for an eSIM card.
You need to provide the embedded-SIM ID (EID) information when applying for an eSIM
card. This information is related to whether your phone has a built-in eSIM smart chipset. To
view this information, go to Settings > About phone > Show EID. If the EID information is
not displayed, it indicates that this feature is not supported on your phone.
You can apply for multiple eSIM cards, the maximum number of which is determined
b
y the eSIM chipset capacity of your phone. If the number of eSIM cards you apply for
has exceeded the limit, you will see a prompt on your phone indicating that you cannot
add any more eSIM cards.
Only one eSIM card can be used at a time.
Add an eSIM Card
1 Go to Set
t
ings > Mobile network > SIM management.
Settings
135