User manual

Table Of Contents
Touch Connected devic
es to view the connected devices list and blocklist. Touch a device in
the Connected devices list to move it to the Blocklist list as prompted. You can also
remove a device from the list.
If you are sharing a mobile data network, you can also touch More to set Data limit and
AP band.
Share Your Network via Bluetooth
1 Go to Settings > Bluetooth, and enable Bluetooth. Select a device, then follow the
onscreen instructions to complete pairing.
2 Go to Settings > Mobile network > Personal hotspot > More, and enable Bluetooth
tethering.
3 On the Bluetooth settings screen of the paired device, touch
next to the name of
your devic
e, then enable Internet access to share your network.
Share Your Network via USB
1 Use a USB cable to connect your phone to your computer.
2 On your phone, go to Settings > Mobile network > Personal hotspot > More, and
enable USB tethering to share your mobile data or the currently connected Wi-Fi
network.
Use VoLTE to Make HD Video Calls
VoLTE (Voice over LTE) is an IP-based data transmission technology. After enabling VoLTE, it
can provide you with fast call connection times and high-quality voice and video calls.
Enable VoLTE
1 Contact your carrier to activate the VoLTE service for your SIM card. If both the primary
and secondary SIM card trays of a dual-SIM phone support VoLTE, it can be enabled for
both SIM cards.
2 If two SIM cards have been inserted, go to Settings > Mobile network > Mobile data. In
the network settings area for SIM 1 or SIM 2, enable VoLTE calls.
This feature may vary depending on your carrier.
5G ser
vices are only available in some countries and regions.
Make a Video Call
Video calls ar
e onl
y possible when both parties are using VoLTE-activated devices.
1 Open Phone, touch the Contacts tab at the bottom of the screen, then select the contact
you want to call.
2 Touch to make a video call.
During a voic
e call, you can touch
to switch to a video call.
Settings
138