User manual

Table Of Contents
Charging Pad Indicator Description
Blinks once The charger is connected to the power supply.
Steady on The device is charging.
Blinks quickly There are charging issues.
Charging Your Phone with a PC
1 Connect your
phone to a PC or other device using a USB cable.
2 When the Use USB to dialog box is displayed on your phone, touch Charge only.
If another option has been set previously, the dialog box will not pop up. Swipe down
from the status bar to open the notication panel, touch Sett
ings, then select Charge
only.
Overview of Battery Icons
You can check the battery level from the battery icon on the phone screen.
Battery Icon Battery Level
Less than 4% battery remaining.
Charging, less than 10% battery remaining.
Charging, 10% to 90% battery remaining.
Charging, at least 90% battery remaining.
If 100% is displayed next to the bat
tery icon, or a charging complete
message is displayed on the lock screen, the battery is fully charged.
Use Wireless Reverse Charging
Wir
eless r
everse charging is supported by devices that support the Wireless Charging
Standard, such as phones, tablets, watches, and bands.
Before using wireless reverse charging, ensure that the battery level of your phone is higher
than 20%.
1 Go to Settings > Battery, and enable Wireless reverse charging.
2 Power on the device to be charged, and place it on the center of the back of your phone.
Do not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within 5 seconds, adjust its position and try again.
4 If the device to be charged is removed from the phone for more than 2 minutes during
charging, Wireless reverse charging will automatically be disabled.
Essentials
31