User Guide

4
3. Close the card slot cover.
Do not remove the card slot cover from the tablet.
To remove the microSD card when HUAWEI MediaPad is
powered on, from the Home screen, touch > Storage >
Unmount SD card. Then open the card slot cover, and
gently press the microSD card. The microSD card then pops
out.
Charging the Battery
1. Connect your charger to the provided USB cable.
2. Connect the charger to a power outlet.
3. Connect your HUAWEI MediaPad to the USB cable to
start charging the battery.
With HUAWEI MediaPad powered on, the battery icon in the
status bar turns when the battery is fully charged.
Battery Usage Precautions
> If HUAWEI MediaPad has not been used for a long time
or the battery power is extremely low, you may not be
able to power it on immediately after you begin
charging the battery. This is normal. Allow the battery to
charge for a few minutes before attempting to power
your HUAWEI MediaPad on.
> The battery is rechargable. Rechargeable batteries
have a limited number of charge cycles. When your
HUAWEI MediaPad is used for a long time, its standby
time will decrease. To maximize its lifespan, do not
charge the battery too frequently.