User Guide

4
To remove the microSD card when HUAWEI MediaPad is
powered on, access the Home screen, and touch >
Storage > Unmount SD card. Then open the microSD card
slot cover and gently push the microSD card. The microSD
card then pops out.
Charging the Battery
1. Connect your charger to the provided USB cable.
2. Connect the charger to a power outlet.
3. Connect your HUAWEI MediaPad to the USB cable to
start charging the battery.
With HUAWEI MediaPad powered on, the battery icon in the
status bar turns when the battery is fully charged.
Battery Usage Precautions
> If HUAWEI MediaPad has not been used for a long time
or the battery power is extremely low, you may not be
able to power it on immediately after you begin
charging the battery. This is normal. Allow the battery to
charge for a few minutes before attempting to power
your HUAWEI MediaPad on.
> The battery is rechargable. Rechargeable batteries
have a limited number of charge cycles. When your
HUAWEI MediaPad is used for a long time, its standby
time will decrease. To maximize its lifespan, do not
charge the battery too frequently.
> The time required to fully charge the battery depends
on the ambient temperature and the age of the battery.