Operation Manual

3
1. Remove the back cover.
2. Install the microSD card.
3. Replace the back cover.
1.4 Switching Your MediaPad On or Off
Press and hol d the Power button until your Medi aPad vibrates to switch on your MediaPad.
The first time you switch on the tablet, complete the setup by following the on-screen
instructions.
To switch off your MediaPad, press and hold the Power button until the screen displays a
dialog box, and then touch
OK i n the di alog box.
When the MediaPad is switched on or malfunctions, press and hold the Power
button for 10 seconds. After release, press and hold the Power button again until
your MediaPad vibrates, indicating that it is restarting.
1.5 Charging the Battery
To charge the MediaPad's battery, connect the charger to the charger port and plug the
charger into a power outlet, as shown in the following figure.