WATCH D User Guide-(MLY-B10,01,en-gb)
Table Of Contents
- Contents
- Getting Started
- Buttons and screen control
- Pairing and connecting to wearable devices
- Measure the wrist circumference and select a strap and airbag
- Wearing the watch
- Setting the time and language on the watch/band
- Setting the AOD watch face
- Configuring Gallery watch faces
- Locking or unlocking
- Customising the function of the Down button
- Charging
- Updating the watch
- Powering on, powering off, and restarting the watch
- Blood pressure management
- Care for health
- Assistant
Incorrect postures when measuring
blood pressure
5 Tap Measure on the measurement screen to start a measurement. After the measurement
is complete, the measurement result will be displayed.
You can also press the Down button twice to start a measurement.
• An error occurred while measuring.
Table2-1 Inaccurate measurement results
Error Scenarios Icon Possible Causes Solution
Not using the
standard measuring
posture
Your posture was not the
standard measuring posture,
and your watch was not at the
same height as your heart.
Perform the
measurement based
on the standard
measuring posture
as shown in the
gures.
The measurement
was done while you
were moving.
The measurement was
performed in an environment
where you were moving, such as
in a vehicle or an lift.
Do not use this
product to measure
blood pressure in an
environment where
you are moving.
Blood pressure management
13