WATCH D User Guide-(MLY-B10,01,en-gb)

3 Follow the onscreen instructions to go to Settings > Bluetooth and select your device
for pairing. Once a pairing request is displayed on the device screen, touch √.
4 When a pop-up requests a Bluetooth pairing via the Huawei Health app, touch Pairing.
A pop-up will display, asking you whether to allow the device to display notications.
Touch Allow.
5 Wait for about 10 seconds until the Huawei Health app displays a message indicating
that the pairing is successful. Touch Done to complete the pairing.
Measure the wrist circumference and select a strap
and airbag
Measuring your wrist's circumference and selecting a suitable strap
1 At a position on your wrist that is about the width of two
ngers away from the bottom
of your palm, put the end of the ruler that comes with the watch through the buckle on
the head.
2 Pull the ruler until it touches your arm, but don't pull it too tightly. Record the position
indicated by the arrow.
3 Select the strap and airbag based on the scale value.
Replacing the strap and airbag with ones in suitable sizes
1 Open the strap nail buckle and the upper and lower buckles of the airbag.
2 Press the cover button and pull up the airbag to separate the airbag cover from the body
of the watch.
3 Push the lever inwards and pull the strap outwards.
4 Align one side of the strap to be installed with the watch body, push the lever inwards,
and fasten it.
5 Align the airbag with the air nozzle and press the airbag cover.
Getting Started
4