Quick Start Guide
Table Of Contents
- Know Your Device
- Before using the device, familiarize yourself with its basic operations.
- lTo power on your device, press and hold the power button until the screen turns on.lTo power off your device, press and hold the power button, and then touch .lTo restart your device, press and hold the power button, and then touch .lPress and hold the power button for 10 or more seconds to forcibly restart your device.
- Headset jackMicro-USB portTips AppPower buttonVolume button
- Getting Started
- Dual Card Dual Standby Single Pass (dual-SIM devices only)
- For More Information
- If you encounter any problems while using your device, you can obtain help from the following resources:
- lVisit http://consumer.huawei.com/en to view device information, frequently asked questions and other information.lVisit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region.
- Go to Settings and touch System > About phone > Legal to view legal information for your product.Go to Settings and touch System > About phone > Legal > Safety information to view safety information for your product.Go to Settings and touch System > About phone > Authentication info to view regulatory information for your product.Go to Settings and touch System > Certification logos to view more information on certification logos for your product.
- All pictures and illustrations in this guide, including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, express or implied.
- Safety Information
- Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
- Operation and safety
- Disposal and recycling information
- Reduction of hazardous substances
- EU regulatory conformance
- Body worn operationThe device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- The highest SAR value reported for this device type when tested at the ear isMRD-LX1N0.33 W/kgAnd when properly worn on the body isMRD-LX1N1.05 W/kg
- StatementHereby, Huawei Technologies Co., Ltd. declares that this device MRD-LX1N is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification.This device may be operated in all member states of the EU.Observe national and local regulations where the device is used.This device may be restricted for use, depending on the local network.
- Restrictions in the 2.4 GHz band:Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
- Frequency Bands and Power
- Accessories and Software Information
- FCC Regulatory Compliance
- Body worn operationThe device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
- Certification information (SAR)This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.
- The highest SAR value reported to the FCC for this device type when using it at the ear isMRD-LX1N0.66 W/kgAnd when properly worn on the body isMRD-LX1N0.47 W/kgAnd when using the Wi-Fi hotspot function isMRD-LX1N0.47 W/kg
- FCC statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment.
- Legal Notice
- A
