Operation Manual

Enabling Huawei Share
1 Swipe down from the status bar to open the notification panel.
2 Touch Huawei Share.
l Touch the Huawei Share switch. This enables Wi-Fi and Bluetooth automatically.
l If you disable Wi-Fi or Bluetooth, the Huawei Share switch will turn off automatically.
Using Huawei Share to transfer files
Ensure that Huawei Share is supported on both devices. Huawei Share must be enabled on
the receiving device and the screen must be switched on.
1 On your device, select the file(s) you want to share. Touch Share.
2 Select the receiving device from those listed.
3 On the receiving device, select ACCEPT from the popup dialog to accept the file transfer
request. Open the notification panel to view file transfer progress.
To cancel sending, touch the name of the receiving device on your device.
By default, received files are saved to the Huawei Share folder in Files.
Using a USB port to transfer data
Selecting the USB connection mode
1 When you use a USB cable to connect your phone to a computer or another device, Allow
access to device data? will be displayed in a popup dialog.
2 Touch No, charge only.
3 Swipe down from the status bar to open the notification panel, and then touch Charging via
USB. You can choose from the following USB connection modes:
l Charge only: Charge your phone only.
l Device file manager (MTP): Transfer files between your phone and a computer.
l Camera (PTP): Transfer images between your phone and a computer. If your phone does
not support MTP, the PTP protocol will be used to transfer files and images between your
phone and computer.
l MIDI: Use your phone as a MIDI input device and play MIDI files on your computer.
Transferring data between your phone and a computer
Use a USB cable to connect your phone to a computer and transfer data between the two
devices.
Network and Sharing
46