User manual

New Device
New Device Conguration
Connecting to the Internet
Connect to Wi-Fi networks effortlessly with your device.
Connecting to a Wi-Fi network
1 Swipe down from the status bar to open the notication panel.
2 Touch and hold to open the Wi-Fi settings screen.
3 Switch on Wi-Fi. Your device will list all available Wi-Fi networks at your location.
4 Select the Wi-Fi network you want to connect to. If you select an encrypted network, you will also
need to enter the Wi-Fi password.
Connecting using mobile data
Before using mobile data, ensure that you have a data plan with your carrier to avoid incurring
excessive data charges.
1 Swipe down from the status bar to open the notication panel.
2 Touch to enable mobile data.
To save battery power and reduce data usage, disable your mobile data connection when you
don't need it.
Enroll a Fingerprint to Unlock the Screen
You can enroll a ngerprint on your Phone to unlock your screen, access Safe, or use App lock
without a password.
l Fingerprint unlock is only available when your unlock method is set to Pattern, 4-digit PIN,
Custom PIN or Password. When your Phone restarts or your
ngerprint is not recognized,
you will need to use your lock screen password to unlock the device.
l Before enrolling a ngerprint, make sure your nger is clean and dry.
1 Open Settings.
2 Go to Security & privacy > Fingerprint ID and follow the instructions to set or enter the lock
screen password.
3 Once you have done so, touch New ngerprint to enroll a ngerprint.
4 Place your ngertip on the ngerprint sensor and hold it there until your Phone vibrates. You can
touch it lightly or press down slightly harder, according to your personal preference. Repeat this
step using different parts of your ngertip.
5 After enrollment is complete, touch OK.
10