Operation Manual

Unboxing your Phone
Getting to know your phone
Dual-tone flash
Fingerprint scanner
Camera
Headset jack
Front camera
Power button
Volume button
USB-C port
Speaker
Microphone
Earpiece
Light sensor
Status indicator
Do not cover the light sensor, as this will affect some of the phone's functions. Ensure that
you use a screen protector that has a purpose-built hole for the light sensor.
Inserting a SIM card and microSD card
Your phone's 2-in-1 card slot is located on the upper left side of the phone. You can insert 2
nano-SIM cards, or 1 nano-SIM card and 1 microSD card.
Tips:
l Your phone only supports nano-SIM cards. Contact your carrier for a new or replacement
nano-SIM card.
l Only use standard nano-SIM cards to avoid damaging the SIM card tray.
l Ensure that the card is in the correct position and keep the card tray level when inserting it into
your phone.
l Be careful not to hurt yourself or damage your phone when using the SIM eject pin.
l Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
1 Press and hold the power button, and then select to turn off your phone.
2 To remove the card tray, insert the SIM eject PIN included with your phone into the small hole
next to the card tray.
5