User manual

Underexposure warning
Manual settings
Low
exposure
icon
Touch this icon to restore the default exposure settings. This icon will only appear
when the exposure is too low.
Manual
settings
l : Touch to configure the metering mode (the method used to determine the
exposure). You can select matrix metering, center-weighted metering or spot
metering. Matrix metering is set by default.
l ISO: Touch to adjust the camera's sensitivity to light. Increasing the ISO will
create a brighter picture, but there will be a noticeable increase in noise. You
can configure the camera to adjust the ISO automatically or you can adjust it
manually.
l S: Touch to set the shutter speed. You can configure the camera to adjust the
shutter speed automatically or you can adjust it manually.
l EV: Touch to set the exposure compensation. Select an exposure setting to
increase/decrease the brightness. Touch and hold the icon to lock the current
exposure setting.
l AF: Touch to set the focus mode. You can select touch to focus, continuous
autofocus or manual focus. Continuous autofocus is set by default. When
continuous autofocus is selected, touch and hold the icon to enable the focus
lock.
l : Touch to select a white balance according to the ambient light conditions.
You can choose from daylight, tungsten bulb, fluorescent lamp and more. You
can also adjust the colour temperature. Touch and hold the icon to lock the
white balance.
Camera and Gallery
51