User manual
Turn flash on/off
View photos or videos
Switch to video mode
Take a photo
Switch to front/rear camera
Enable Wide aperture mode
Enable Portrait mode
Enable Moving picture mode
Basic photo mode: Open Camera. In the viewnder, touch to take a photo. You can also set
the volume down button as a shutter button for your camera.
Select a camera mode: From the viewnder, swipe right to enter the camera mode screen. You can
change a photo mode according to your needs.
Zoom your camera in or out: Touch and hold the camera screen with two ngers. Separate your
ngers to zoom in, and pinch them together to zoom out. If you zoom in beyond your camera's
digital and zoom limit, the image resolution will begin to decrease. After two ngers are pinched, the
focal length adjustment area is displayed on the side of the shooting screen. You can drag the slider
to adjust the focal length.
Adjust your camera's exposure: Your camera will adjust its exposure automatically depending on the
ambient light level. Increasing the exposure will make pictures appear brighter whereas decreasing the
exposure will make pictures appear darker. You can adjust the exposure manually from the viewnder
by touching the screen and dragging the icon up or down.
Enable or disable ash: Flash is used to provide extra lighting for taking photos in low light conditions.
From the
viewnder, touch to select one of the following ash modes:
l Auto: The camera automatically enables or disables ash depending on the ambient light level.
l Off: Disable ash.
l On: Enable ash.
Camera
45