Operation Manual

Calls and Contacts
76
Enabling do not disturb mode
Do not disturb mode allows you to work or relax in peace and quiet. Your phone will only
notify you about important calls or messages.
1 Open Settings .
2 Touch Do not disturb and turn on the Do not disturb switch.
3 Touch Define priority interruptions > Whitelist for calls and messages > to add
contacts to the whitelist.
When do not disturb mode is enabled, your phone will only ring or vibrate when chosen
contacts call or message you. Your phone will mute ringtones or vibrations for any other
calls or messages. Notifications for these can be viewed in the notification panel.
Configuring the harassment filter
The harassment filter automatically blocks calls and messages from unknown or
blacklisted sources. The blacklist is constantly updated, ensuring that you are never
disturbed.
Open Phone Manager , then touch Harassment filter to configure filter rules and the
blacklist or whitelist. For more information, see Harassment filter.
You can also open Dialer and then touch > Harassment filter to configure the
harassment filter.
Configuring voicemail
Divert calls to your voicemail when your phone is switched off or unavailable. Callers can
leave a voice message which you can listen to later.
Voicemail must be supported by your carrier. Please ensure that you have subscribed
to this service. Contact your carrier for information about their voicemail service.
1 Open Dialer .
2 Touch > Settings
3 Touch Additional settings . If your phone has dual SIM support, touch Additional
settings
under Card 1 or Card 2 .