Mate 30 User Guide-(TAS-L09&L29,EMUI10.1_01,en,4G)

Before using wireless reverse charging, ensure that the battery level of your phone is higher
than 20% and that it is not in Ultra Power Saving mode.
1 Go to Settings > Battery, and enable Wireless Reverse Charging.
2 Power on the device to be charged, and place it on the center of the back of your phone.
Do not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within 5 seconds, adjust its position and try again.
4 If the device to be charged is removed from the phone for more than 2 minutes during
charging, Wireless Reverse Charging will automatically be disabled.
Reverse Charging with an OTG Cable
On-The-Go (OTG) is a USB transmitting technology that allows a phone to directly access
les on a USB ash drive or digital camera, or connect to an external device such as a
keyboard or mouse, with the help of an OTG cable.
You can use your phone to charge other devices using an OTG cable.
1 Connect your phone with the device to be charged using an OTG cable.
2 When the Use USB to dialog box is displayed on your phone, touch Reverse charge.
If another option has been set previously, the dialog box will not pop up. Swipe down
from the status bar to open the
notication panel, touch Settings, and then select
Reverse charge.
3 Follow the onscreen instructions on the device to be charged to start charging.
Essentials
23