Mate 30 User Guide-(TAS-L09&L29,EMUI11.0_01,en)

Answer a New Incoming Call During a Call
1 When y
ou receive an incoming call when you are already engaged in a previous call,
touch
to answer it.
2 T
ouch
, or touch a held call in the call list to switch between the two calls.
Enable Call F
orwarding
After the Call forwarding feature is enabled, calls that meet your pre-set conditions will be
automatically transferred to a specied phone number. This feature requires the support of
y
our carrier. For details, contact your carrier.
1 Open Phone, go to
> Set
tings, and touch Call forwarding.
2 Select and enable a forwarding method, then enter and conrm the target number.
If your phone has two SIM cards installed, congure the settings for SIM 1 and SIM 2
r
espectively.
This feature may vary depending on your carrier.
Disable Call Forwarding
1 Open Phone, go to
> Settings, and touch Call forwarding.
2 Select the forwarding mode and disable it.
Make a Call
Dial a Number or Select a Contact to Make a Call
Use either of the following methods to make a call:
• Open Phone, enter part of a phone number, the rst letter of a contact's name, or a
c
ontact's initials to nd a contact, then touch to make a call.
• Open Phone, touch the Contacts tab, then search for a contact or select a contact in the
contact list to make a call.
Touch
to end the call.
Use Speed D
ial
Once you've set up speed dialing for a contact, you can quickly call that contact with the
assigned number key.
Go to Phone >
> Set
tings > Speed dial, select a number key, then set a contact for this
speed dial number.
Press the Power Button to End a Call
During a call, press the Power button to end the call.
Apps
85