Mate 30 User Guide-(TAS-L09&TAS-L29,EMUI10.0_02,en-us,4G)

Table Of Contents
Keypad tones
Screen lock
Screenshot
Screen touch
Vibrate on touch
Startup sound
Do Not Disturb
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner
notications will not be displayed.
Enable or Disable Do Not Disturb Mode
You can enable or disable Do Not Disturb using either of the following methods:
Swipe down from the status bar to open the notication panel, then swipe down on it
again to show all shortcuts. Touch to enable or disable Do Not Disturb. You can touch
and hold to access the Do Not Disturb settings screen.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable or disable Do Not
Disturb.
Once Do Not Disturb has been enabled,
will display in the status bar. When you receive
calls, notications, or messages, they will be muted, the screen will not light up, and banner
notications will not display.
Set a Schedule for Do Not Disturb Mode
Go to Settings > Sounds & vibration > Do Not Disturb, touch Scheduled, set the time
period and repeat cycle, then enable Scheduled.
Make Exceptions in Do Not Disturb Mode
While in Do Not Disturb mode, you can enable your phone to ring for calls and messages
from certain sources so you don't miss anything important.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable Do Not Disturb or
Scheduled. Then you can:
Touch Calls or Messages and select one of the options. If you set an exception, your phone
will ring for calls or messages from the selected source.
Once Repeated calls is enabled, a second call from the same number within 15 minutes
will not be silenced.
Settings
158