HUAWEI ETS5623 Fixed Wireless Terminal USER GUIDE
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Packing List The Fixed Wireless Terminal (hereinafter referred to as FWT) package box contains the following items. If any of the items is lost or damaged, contact your local dealer. y Main unit, handset, and coiled cord y Power adapter y Battery y Antenna (optional) y Certificate of Quality y User Guide Your Fixed Wireless Terminal 1 2 3 4 5 6 7 8 9 11 10 12 No. Item Description 1 Display Screen 2 Indoor antenna Receive signals 3 Left soft key y Access the main menu in standby mode.
No. Item Description 4 Scroll keys y Access the shortcut screen in standby mode. y Adjust the volume during a call. 5 Right soft key y Access the phone book screen in standby mode. y Select the option displayed on the lower right corner of the 6 OK key y Access the main menu in standby mode. y Select the option displayed on the lower left corner of the screen. display screen. 7 End key y End a call or reject an incoming call. y Power on or off the FWT (by pressing and holding it).
Icon Description Icon Voice message received Description Battery power level Installing SIM Card Caution: The SIM card and its golden contact can be easily damaged by a scratch or bend. Be careful when installing or removing the SIM card. to power off your FWT and then disconnect it from the power socket. Install the Press and hold SIM card according to the following figure. Make sure that the golden contact of the SIM card is facing downwards.
Installing the Power Adapter Press and hold to power off your FWT. Connect the power adapter to the FWT, and plug it to the power socket. Installing the Indoor Antenna Power off your FWT and disconnect the FWT from the power socket. Then connect the indoor antenna to the antenna jack on the main unit. Make sure that the antenna is stably connected to the antenna jack. Menu Tree Messages Phone Book Call History 1. Write 1. Name List 1. Missed Calls 2. Inbox 2. Add New 2. Answered Calls 3.
Using the Function Menu 1. In standby mode, press Left soft key to display the main menu. 2. 3. 4. Press / to scroll in the menu. Press Left soft key to display submenu. Access the submenu in either of the ways: y Press / to scroll to a submenu item and press Left soft key to access it. y Press the number key corresponding to the number of a submenu to access it. 5. Press Right soft key to return to the previous menu or return to the home screen. 6. Press to return to the standby mode.
Note In the editing mode, press Right soft key once to delete the letter on the left of the cursor. Press and hold Right soft key to delete all the entered letters. Entering Letters In the "ABC" and "abc" input mode, you can enter letters. You can press the number key labeled with desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and by analogy.
The display screen does not turn on after the FWT is powered on (the FWT is connected to the power adapter). 1. The voltage output of the power adapter does not meet the requirement of the FWT. Check whether the AC input is normal and the power adapter is the approved one. 2. The external voltage of the power adapter is low or unstable; disrupting the normal functioning of the FWT. Check whether the external voltage of the power adapter is normal. You can also install the battery in the FWT.
Potentially Explosive Atmosphere Power off your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not power on your device at refueling points such as service stations.
y Do not connect two poles of the battery with conductors, such as metal materials, keys, or y y y y y jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your body. Do not disassemble the battery or solder the battery poles. Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion. If battery electrolyte leaks out, ensure that the electrolyte does not touch your skin and eyes.
directive of the European Union. The reason for separating WEEE and batteries from other waste is to minimize the potential environmental impacts on human health of any hazardous substances that may be present.
