user manual

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
GPS Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
139
Error code
Error description
285
Too many parameters
14.5 ^WPDGP–Command for Starting GPS Position
14.5.1 Syntax
Command
Possible Response(s)
^WPDGP
<CR><LF>OK<CR><LF>
Error:
<CR><LF>+CME ERROR: <err><CR><LF>
14.5.2 Interface Description
This command is used to start a GPS position. Each time only support one position, if
it has have a GPS session, then this command will returns error.
14.5.3 Parameter Description
<err>: error code or error description
Error code
Error description
4
Operation not supported
276
GPS function disabled
283
PD session is ongoing
14.6 ^WPEND–Command for ending GPS Position
14.6.1 Syntax
Command
Possible Response(s)
^WPEND
<CR><LF>OK<CR><LF>
Error:
<CR><LF>+CME ERROR: <err><CR><LF>