User Guide-(TIA-B09&B29,02,EN-US)
Table Of Contents
- Contents
- Getting Started
- Exercise
- Health
- Assistant
- More
- Do Not Disturb
- Adding favorites
- Setting vibration strength
- Setting screen on/off for Huawei bands
- Locking or unlocking
- Setting time and language
- Restoring the device to its factory settings
- Updating your device
- Adjusting or replacing the strap
- Viewing the Bluetooth name, MAC address, serial number, model, and version number
- Water resistance
- Wearing the device
• The device can receive messages but will not notify you when you are exercising,
using Do Not Disturb mode, or asleep. Swipe up on the home screen to view new
messages.
• You will not receive any app notications on the wearable device if the app is open
on your phone.
Changing watch faces
Before using this feature, update the Health app and your device to the latest versions.
Your phone must run HarmonyOS 2/Android 6.0/iOS 12.0 or a later version.
• Method 1: Touch and hold anywhere on the home screen until the device vibrates. When
the home screen zooms out and shows a frame, swipe left or right to select your preferred
home screen design.
• Method 2: On the device, go to Settings > Display > Watch face, then swipe left or right
to select your preferred home screen design.
• Method 3: Ensure that your watch is connected to the Health app, open the Health app, go
to Watch faces > More, and touch INSTALL under your preferred watch face. The device
will automatically switch to the chosen one once it is installed. Alternatively, touch a watch
face that you have installed, then touch SET AS DEFAULT to switch to it.
Delete a watch face: Open the Health app, go to Watch faces > More > Mine > Edit, and
touch the cross icon in the upper right corner of a watch face to delete it.
Setting an alarm
Method 1: Set an alarm on your device.
1 Enter the app list, select Alarm, and touch to add an alarm.
2 Set the alarm time and repeat cycle and then touch OK. If you do not set the repeat cycle,
the alarm will be a one-time alarm.
3 You can touch an alarm to delete it or modify the alarm time, tag, and repeat cycle. Only
event alarms can be deleted.
Method 2: Set an alarm in the Health app.
Smart alarm:
1 Open the Health app, touch Devices then your device name, and go to Alarm > SMART
ALARM.
2 Set the alarm time, smart wakeup time, and repeat cycle.
3 Touch √ in the upper right corner (for HarmonyOS/Android users) or touch Save (for iOS
users) to
nish conguring the settings.
4 Return to the home screen and swipe down to sync the alarm settings to your device.
5 You can touch an alarm to modify the alarm time, smart wakeup time, and repeat cycle.
Getting Started
4