Contents Getting Started Appearance Button operations Using the touchscreen Pairing with an EMUI/Android phone Pairing with an iPhone Pairing with a new phone Introduction to Icons Charging Wearing the watch Locking or unlocking Powering on/Powering off/Restarting Answering and making calls 1 1 2 2 3 4 4 5 7 7 8 8 Earbuds Management Taking out and wearing your earbuds Managing your earbuds Using gestures to control your earbuds Connecting your earbuds to a new device Finding your earbuds Factory reset Sel
Contents Menstrual cycle predictions 25 HUAWEI Assistant·TODAY Apps Managing messages Enabling or disabling Do Not Disturb Controlling music playback Settings alarms Receiving weather reports Using your watch to find your phone Remote shutter 26 26 27 28 29 30 30 31 31 Adjusting and changing the strap Configuring Gallery watch faces Setting the AOD watch face OneHop for watch faces Managing watch faces Setting the time and language Setting sounds Adding custom cards Adjusting the screen brightness Upda
Getting Started Appearance Button operations Operation Press Press and hold Function • Wake the device screen up. • Access the app list screen from the home screen. • Return to the home screen. • Mute an incoming call. • Power on the watch. • When the watch is powered on, press and hold the side button for three seconds or longer to display the restart/power-off screen. • Forcibly restart the watch by pressing and holding the side button for more than 12 seconds.
Getting Started Operation Function Gently push the Open the watch cover. cover-opening button There are certain exceptions such as for calls and workouts. Using the touchscreen The device comes with a colour touchscreen that supports full-screen touch operations (including swiping up, down, left, and right, and touching and holding). Operation Function Touch Confirm your selection. Touch and hold Change the watch face (when the watch home screen is displayed).
Getting Started 4 Place your wearable device close to your phone. Open the Huawei Health app, touch in the upper right corner, and touch ADD. Select the wearable device that you would like to pair your phone with, and touch LINK. Alternatively, touch Scan to pair by scanning the QR code displayed on your wearable device. 5 When a Huawei Health app pop-up window appears requesting a Bluetooth pairing, touch ALLOW.
Getting Started When a HUAWEI Health app pop-up window appears requesting a Bluetooth pairing, touch Pair. When another HUAWEI Health pop-up window appears indicating a successful pairing, touch Done. • If your phone is running an earlier version of iOS: a The HUAWEI Health app displays the pairing guide screen. b Follow the onscreen pairing instructions to go to Settings > Bluetooth and select HUAWEI W Buds from the Bluetooth list.
Getting Started Flashlight Find Phone -- -- -- -- Level-2 Menu Steps Activity Hours active Disconnected from the Connected to the phone's Connected to the phone's phone's Bluetooth and the Bluetooth and the Huawei Bluetooth but disconnected Huawei Health app Health app from the Huawei Health app Bluetooth connection status Charging Charging 1 Connect the charging cradle to a power adapter and then connect the power adapter to a power supply.
Getting Started • You are advised to use a Huawei power adapter, a USB port of a computer, or a nonHuawei power adapter that complies with corresponding regional or national laws and regulations as well as regional and international safety standards, to charge your watch. Other chargers and power banks that do not meet corresponding safety standards may cause issues such as slow charging and overheating. Exercise caution when using them.
Getting Started Method 3: View the battery level on a watch face that displays the battery level. Method 4: Check the battery level on the device details screen in the Health app. Wearing the watch Make sure that the rear cover of the watch is clean, dry, and free of foreign objects. Attach the monitoring area of the watch to your wrist and make sure it feels comfortable. Do not attach a protective film to the back of the watch. It has sensors that can identify signals from the human body.
Getting Started Disabling the PIN Swipe down on the device's home screen, go to Settings > PIN > Disable PIN, and follow the onscreen instructions to disable the PIN. Forgot the PIN If you have forgotten the PIN, restore the device to its factory settings and try again. Open the Huawei Health app, go to the device details screen, and touch Restore factory settings.
Getting Started • If you are not currently wearing the earbuds, you need to wear them first. • If you are already wearing the earbuds, the watch will automatically make the call. Rejecting/Ending calls • To reject or end a call, touch • Alternatively, touch . to reject the call and reply with an SMS message instead. You can only reject calls and reply with an SMS message when your watch is paired with certain phone models.
Earbuds Management Taking out and wearing your earbuds Taking out the earbuds 1 Gently push the button which opens the cover as shown in the diagram below. 2 When the cover pops open, lift it to open the cover fully. 3 Take out the earbuds, wear them, and close the cover. Wearing the earbuds Insert an earbud into your ear canal and gently rotate the tail of the earbud until it is sitting comfortably.
Earbuds Management 2 Close the cover. Managing your earbuds Managing the earbuds from your phone The guidance below applies to when you have opened the watch cover, or taken the earbuds out of the watch. 1 Open the Huawei Health app, enter the device details screen, and touch Earbuds. 2 On this screen you can: • Choose from Noise cancelling, Off, or Awareness mode. • Touch Sound effects to choose from Default, Bass boost, Treble boost, and Voices.
Earbuds Management • Touch More settings to enable or disable Auto-switch L/R, Reset earbuds, or check the system version of the earbuds. Using gestures to control your earbuds Setting earbud gestures Open the Huawei Health app, go to the device details screen, go to Earbuds > Gestures, and touch Double-tap or Triple-tap to set gesture controls. For example, set double-tapping to answer/end a call.
Earbuds Management Go to Settings > Bluetooth, select HUAWEI W Buds (which is the Bluetooth name of the earbuds) from the discovered devices, and complete the pairing. Finding your earbuds 1 Swipe down on the watch face screen to access the shortcut menu, and go to Find Device > Earphones. • If both earbuds are connected to your watch, touch Ring left bud or Ring right bud. • If an earbud is disconnected, touch Reconnect first. Once reconnected, touch Ring left bud or Ring right bud.
Earbuds Management 2 Turn the new ear tip over in the same way, and as shown in the diagram below, gently push it into the slot. Finally, turn the ear tip over once again, so that it is back to normal.
Exercise Activity records Wear your device correctly for it to automatically record data relating to calories burnt, distance, step count, duration of moderate-to-high intensity activities, and other daily activities. Access the app list, swipe on the screen until you find Activity records, touch it, and then swipe up or down to view data relating to calories burnt, distance, step count, duration of moderate-to-high intensity activities, and other activities.
Exercise Smart companion After Smart companion is enabled, you can view how much you have exceeded or fallen behind the target pace in real time during an outdoor workout. 1 Press the Up button to access the app list and touch Workout. 2 Touch the Settings icon to the right of Outdoor run and enable Smart companion. 3 Touch Target pace to customise a target running pace. 4 Return to the app list, touch Outdoor run, wait until GPS positioning is complete, and touch the Run icon to start running.
Exercise Workout status Enter the watch's app list, touch Workout status ( ), and swipe up on the screen to view data including your Running Ability Index, recovery status, training load, and VO2Max. • Running Ability Index (RAI) is a comprehensive index that reflects a runner's endurance and technique efficiency. In general, a runner with a higher RAI performs better in competitions. • Recovery status reflects the recovery from fatigue caused by the impact of a training session.
Exercise • The supported workout types are subject to the onscreen instructions. • The device will automatically identify your workout mode and remind you to start a workout if you meet the requirements based on the workout posture and intensity and stay in this state for a certain period of time. • If the actual workout intensity is lower than that required by the workout mode for a certain period of time, the device will display a message indicating that the workout has ended.
Health Management Measuring your heart rate Continuous heart rate monitoring is enabled by default, which allows a heart rate curve to be displayed. If this feature is disabled, only the result of a single measurement can be displayed. To guarantee a more accurate heart rate measurement, wear the device correctly and ensure the strap is fastened. Make sure that your device is secure on your wrist during workouts. Ensure that the monitoring module is in direct contact with your skin without any obstructions.
Health Management The resting heart rate data on the device will be cleared on its own at 00:00 (24-hour • clock) or 12:00 midnight (12-hour clock). Your actual resting heart rate may not be displayed or accurately measured, as it is not • always the case that your heart rate was automatically measured at the best time.
Health Management • Your heart rate will not be displayed if you remove the device from your wrist during the workout. However, it will continue to search for your heart rate signal for a while. The measurement will resume once you put the device back on. • You can view graphs that show the changes in your heart rate, maximum heart rate, and average heart rate for each workout from Exercise records in the Huawei Health app.
Health Management Measuring SpO2 • To use this feature, update your wearable device and the Huawei Health app to their latest versions. • To ensure the accuracy of the SpO2 measurement, wear the wearable device properly and tightly. Ensure that the monitoring module is in direct contact with your skin without any obstructions. 1 Wear your wearable device correctly and keep your arm still. 2 Press the side button to enter the app list, swipe on the screen, and touch SpO2.
Health Management • In the Huawei Health app: Open the Huawei Health app, then touch the Stress card to view your latest stress level, daily, weekly, monthly, and yearly stress curves, and corresponding advice. Activity reminder When Activity reminder is enabled, the device will monitor your activity throughout the day in increments (one hour by default). It will vibrate and the screen will turn on to remind you to take a moment to get up and move around if you didn't move around during the set period.
Health Management On the Healthy Living screen, touch Edit tasks or in the upper right corner, select Health plan, and touch Goal settings on the task card to set your daily goals, or touch Change goals to change your goals. Viewing the task completion status • Enter the device's app list, and select Healthy Living to view the completion status of a specific task. • Open the Huawei Health app, and go to Health > Healthy Living to view the task completion status.
Health Management 2. Duration of moderate-to-high intensity activity (unit: minute): The default goal is 30 minutes. Your device will calculate the total duration of your moderate-to-high intensity activity based on your pace and heart rate intensity. 3. Active hours: This ring represents how many hours you have been stood up for during the day. If you have walked for more than 1 minute in an hour, such as for 1 minute between 10:00 and 11:00, this hour will be counted as an active hour.
Assistant HUAWEI Assistant·TODAY The HUAWEI Assistant·TODAY screen makes it easy to view weather forecast, and view information from Calendar. Entering/Exiting HUAWEI Assistant·TODAY Swipe right on the device home screen to enter HUAWEI Assistant·TODAY. Swipe left on the screen to exit HUAWEI Assistant·TODAY. Audio control centre You can use the HUAWEI Music card on the HUAWEI Assistant·TODAY screen to control music playback on both your phone and watch.
Assistant Updating apps 1 Open the Huawei Health app, enter the device details screen, and then touch AppGallery. 2 Touch Manager to view the apps to be updated and the list of installed apps. 3 Go to Updates > Update to update apps to the latest version for a better experience. Uninstalling apps • Uninstall an app in the Huawei Health app on your phone. 1 Open the Huawei Health app, enter the device details screen, and then touch AppGallery.
Assistant Unread messages will not be retained after you view them in the unread message centre. If you want to view them again, go to the corresponding app on your phone. Replying to messages • This feature is not supported when your device is paired with an iPhone. • This feature is only supported when you try to reply to an SMS message with the SIM card that has received the message. When receiving a message on your watch, you can use quick replies or emoticons to reply to it.
Assistant • To disable scheduled Do Not Disturb, go to Settings > Sound and vibration > Do Not Disturb > Scheduled. Controlling music playback Your device must be connected to the Huawei Health app to use this feature. Adding music to your watch 1 Open the Huawei Health app and go to the device details screen. 2 Go to Music > Manage music > Add songs and select the music that you'd like to add. 3 Touch √ in the upper right corner of the screen. You can create a playlist by touching New playlist.
Assistant Swipe left on your watch's home screen to go to the music playback screen, touch in the lower right corner, and select your watch. • Controlling music playback on phone B Swipe left on your watch's home screen to go to the music playback screen, touch in the lower right corner, and select phone B. • Controlling music playback on phone A Swipe left on your watch's home screen to go to the music playback screen, touch in the lower right corner, and select phone A.
Assistant Viewing weather reports You can check your watch to find out about the weather in your local area. Method 1: In the Weather card Swipe right on the screen until you find the Weather card, then you can check your location, the latest weather, temperature, and air quality. Method 2: On a watch face Make sure that you are using a watch face that displays weather information, then you can check the latest weather data on the home screen.
More Adjusting and changing the strap Remove the strap: Move the springbar lever on the strap. Tilt the strap outwards and remove it from the fixing slot on the watch body. Install the strap: Align one side of the springbar pin with the fixing slot. Move the springbar lever on the other side to make the pin draw back and then push into the slot.
More Configuring Gallery watch faces Before using this feature, update the Huawei Health app and your device to their latest versions. Selecting Gallery watch faces 1. Open the Huawei Health app, touch Devices and then your device name, and go to Watch faces > More > Mine > On watch > Gallery to access the Gallery settings screen. 2. Touch + and select either Camera or Gallery as the method for uploading an image. 3. Touch √ in the upper right corner, and then touch Save.
More • Enabling AOD will reduce the battery life. • After AOD is enabled, the Raise to wake feature will be disabled. 1 Open the app list, go to Settings > Watch face & home, and enable Always On Display. 2 After AOD is enabled, the watch face style is set by default. 3 Select Raise to show AOD or Raise to show watch face as required. OneHop for watch faces You can use OneHop to upload images as Gallery watch faces on your watch.
More Changing a watch face on your watch 1 Touch and hold the watch face on the home screen. 2 Swipe left or right to select your favourite watch face. You can also swipe on the screen to the rightmost, touch +, and swipe up or down to select your favourite watch face. Some watch faces support custom control. You can touch at the bottom of the watch face to customise the content that is displayed.
More Setting sounds Setting the ring volume 1 Press the side button on the watch to open the app list and then go to Settings > Sounds & vibration > Rintone. 2 Swipe up or down to adjust the ring volume. Muting and unmuting 1 Press the Side button on the watch to open the app list and then go to Settings > Sounds & vibration. 2 Enable or disable Mute. Adding custom cards 1 Go to Settings > Custom cards or Settings > Display > Favourites.
More • Ensure that the earphones are placed in the watch. The earphones will be updated together with the wearable device. • Touch the Settings icon to the right of Firmware update, enable Auto-download update packages over WLAN, and your device will automatically download the update package and send you a notification every time it detects a new version. Follow the onscreen instructions to update your device. • You are advised to ensure that your device has sufficient power before the update.
