User manual
Table Of Contents
- Contents
- Getting Started
- Powering on/powering off/restarting
- Buttons and screen control
- Icons
- Pairing and connecting to wearable devices
- Charging
- Setting grid layout on the home screen
- Adjusting the screen brightness
- Changing watch faces
- Receiving weather reports
- Setting an alarm
- Message management
- Setting favorite contacts
- Incoming call notifications
- Bluetooth voice calling
- Viewing call logs
- Voice assistant
- Exercise
- Health Management
- Assistant
- More
• Touch the Cross icon in the upper right corner of a selected photo to delete it.
Setting the AOD watch face
After the Always on display (AOD) feature is enabled, the current watch face will be
displayed when you raise your wrist if the main watch face doesn't come with a built-in AOD
watch face.
Setting AOD
1 In the app list, go to Settings > Watch face or Settings > Watch face & home, and
enable AOD.
2 Go to AOD style > Default style and select your preferred style. The style will then be
displayed when the main watch face doesn't come with a built-in AOD watch face and
you raise your wrist.
uses a default watch face style, which doesn't need to be manually set, after AOD is
enabled.
OneHop Watch Faces
You can use OneHop to upload images as Gallery watch faces on your device. Images saved
on the cloud will need to be downloaded before being transferred. When you upload more
than one image, you can tap on the watch face to switch between them.
• Before using this feature, update the Huawei Health app to its latest version, and make
sure that the wearable device is connected to your phones.
• This feature is only available when your device is paired with some HUAWEI phones
that support NFC. Your wearable device must support NFC.
Enabling OneHop
If the feature is not displayed on your device, you do not need to activate it manually.
Once OneHop is enabled on your device, you won't be able to disable it. Even if the
device has been restored to its factory settings, the feature will still be enabled.
1 In the device app list, go to Settings > OneHop to access the OneHop screen.
2 Touch Enable. Once you've enabled the feature, Enabled will display onscreen.
Using OneHop
1 Enable NFC on your phone.
2 Go to Gallery on your phone, select the images you wish to transfer, and tap the NFC area
on the back of your phone against the watch face. Once the transfer is successful, the
images will display on the watch face in sequence.
3 Open the Huawei Health app, go to the device details screen, and touch Watch faces >
More > Mine > Gallery. You will see the transferred images in Gallery. Feel free to
customize the style and layout of the Gallery watch faces to suit your preferences.
Assistant
27