User manual
Table Of Contents
- Contents
- Getting Started
- Powering on/powering off/restarting
- Buttons and screen control
- Icons
- Pairing and connecting to wearable devices
- Charging
- Setting grid layout on the home screen
- Adjusting the screen brightness
- Changing watch faces
- Receiving weather reports
- Setting an alarm
- Message management
- Setting favorite contacts
- Incoming call notifications
- Bluetooth voice calling
- Viewing call logs
- Voice assistant
- Exercise
- Health Management
- Assistant
- More
For details about how to register a HUAWEI ID on a non-HUAWEI third-party phone,
refer to Registering a HUAWEI ID.
Pairing and connecting to wearable devices
• HUAWEI/Non-HUAWEI Android phones
1 After the device is powered on, select a language. Bluetooth is ready for pairing by
default.
2 Place the device close to your phone, open the Huawei Health app on your phone,
touch
in the upper right corner, and then touch ADD. Your phone will automatically
scan for available devices. Select the device you wish to pair with, and touch LINK.
3 When a pairing request is displayed on the device screen, touch √, and follow the
onscreen instructions to complete the pairing.
• iPhones
1 After the device is powered on, select a language. Bluetooth is ready for pairing by
default.
2 Follow the onscreen instructions to go to Settings > Bluetooth and select your device
for pairing. Once a pairing request is displayed on the device screen, touch √.
3 You can place your device close to your phone, open the Huawei Health app on your
phone, touch
in the upper right corner, touch ADD, and then follow the onscreen
instructions to select your device from the pop-up window.
Or you can open the Huawei Health app on your phone, touch
in the upper right
corner, and then touch SCAN to scan the QR code on your device. On your phone, follow
the onscreen instructions and touch Yes > Next.
4 When a pop-up window on your phone requests a Bluetooth pairing via the Huawei
Health app, touch Pair. Another pop-up window will display, asking you whether to
allow the device to display phone
notications. Touch Allow.
5 Wait for several seconds until the Huawei Health app displays a message indicating that
the pairing is successful. Touch Done to complete the pairing.
Pairing and connecting in other scenarios
• If the device is going to be paired with a dierent HUAWEI ID in the Huawei Health app,
you'll need to go to Settings > System & updates > Reset on the device, and then select √
to complete the pairing.
• If the connection failed and cannot be automatically reconnected, or you'd like to use
another phone for pairing, you'll need to go to Settings > System & updates > Disconnect
on the device, and then select √ to complete the pairing.
Getting Started
5