User Guide

4. How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the

router completes the startup process. Use a needle or pin

to press the

RESET

button on the router for more than two

seconds until the indicator light goes out. Wait for the router

to complete the restart process. When the indicator turns red,

this indicates that the router has been restored to its factory

settings.

If the congured router has been restored to factory settings,

you need to congure it again. Then restore the other router(s)

to the factory settings so that it/they can automatically connect

to the congured router.

5. How do I connect an add-on HUAWEI router to my

HUAWEI WiFi Mesh 3 to expand the Wi-Fi network?

You can connect the router in either of the following ways:

• Wired connection. Connect the WAN port of the add-on

router (new or restored to factory settings) to the LAN port

of the congured HUAWEI WiFi Mesh 3 using an Ethernet

cable.

• Wireless connection.

Step 1: Place the add-on router (new or restored to factory

settings) within one meter of the congured HUAWEI WiFi

Mesh 3 and connect it to the power supply.

Step 2: When the indicator on the HUAWEI WiFi Mesh

3 starts to ash, touch the

button on it. Wait until the

indicator on the add-on router shows it is connected to the

network.

Step 3: For broader coverage, disconnect the add-on router

from its power source, then place the router within a 10 m

range of the HUAWEI WiFi Mesh 3, with no more than one

and follow the instructions in this guide to reconnect the cables

and re-congure the router.