User Guide

• The gure is for reference only.

• Ensure that the HUAWEI CPE is connected to the Internet,

and the router is new or restored to factory settings.

• Ensure that the HUAWEI CPE supports the HUAWEI HiLink

function and CoAP protocol. Please consult the distributor for

details.

• Ensure that the distance between your router and the

HUAWEI CPE is less than 10 meters and there are no more

than one wall in between.

Step 2: When the indicator on the HUAWEI CPE starts to

ash, press the

button on it. Wait until the indicator on the

router shows that the router is connected to the network.

Step 3: Place the router in a room with weak signal strength

and connect the power supply.

Safety information

Operation and safety

• Do not use your device if using the device is prohibited. Do not

use the device if doing so causes danger or interference with other

electronic devices.

• Pacemaker manufacturers recommend that a minimum distance of

15 cm be maintained between a device and a pacemaker to prevent

potential interference with the pacemaker. If using a pacemaker,

hold the device on the side opposite the pacemaker and do not

carry the device in your front pocket.

• Avoid dusty, damp, or dirty environments. Avoid magnetic fields.

Using the device in these environments may result in circuit

malfunctions.

• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage

temperatures are -40 °C to +70 °C. Extreme heat or cold may

damage your device or accessories.

• Keep the device and accessories in a well-ventilated and cool area

away from direct sunlight. Do not enclose or cover your device with

towels or other objects. Do not place the device in a container with

poor heat dissipation, such as a box or bag.

• The device should be installed and operated with a minimum

distance of 20 cm between the radiator and your body.