Quick Start Guide-(WS8800,02,en-us,WEU)

16
Step 2: Connect the cables
Take out a router from HUAWEI WiFi Mesh 7, connect it to the
optical/broadband/cable modem using a network cable, then
connect it to a power supply.
Optical/broadband/cable modem
(from your broadband provider)
Router
Insert the cable to the WAN/LAN
auto-adaptation port on the router
Internet
• If the indicator is steady red, this indicates that the router is not
connected to the Internet. Please refer to "Step 3: Set up the router".
• For routers that support WAN/LAN auto-adaptation, the network ports
are WAN/LAN combo ports. You can also specify a xed WAN port
on the router's web-based management page.
Step 3: Set up the router
Method 1: Congure the router on the app
Connect your mobile phone to the Wi-Fi
®
of the router
connected to the modem (no password required). Check for
the Wi-Fi name on the bottom of the router.
1
WiFi
WiFi
Connected
Wi-Fi Name: XXXXXX
POWER
LA N
ADSL
RESET
LAN
WAN
1
POWER
2
3
RESET
4
WAN/LAN