User's Guide

Remote Control
1
2
3
4
5
6
7
8
3
1
2
3
DescriptionItemNo.
Switch the status of TV Set between working
and standby.
Change audio volume of TV set.
Shift video output of TV set.
Change audio tracks.
Mute/resume the audio.
Display the STB setting page.
Quickly switch to the previous channel.
Shortcut to Live TV channel list.
Shortcut to TVOD menu.
Shortcut to VOD menu.
Study the function of the TV set’s Remote
control.
Switch the status of STB between working
and standby.
Install the STB
RJ45 cable
Home gateway
Power adapter
Mini AV
cable
HDMI
cable
Safety Instructions
 This product should be operated only from the type of power source indicated on
the marking label.
 Confirm appropriate power and cable connection before powering on the STB.
 If the STB has been operating for a long time, STB temperature increases. Take
measures for heat dissipation.
 Upon cleaning or long-time unused, disconnect the power cable. Do not pull on
the power cable.
 When disconnecting the power cable, turn off the STB, and then grasp it by the plug.
 During a lightning storm, disconnect the power cable or network cable to avoid
damage to the STB or other accidents caused by lightning strikes.
Maintenance Instructions
 Shield the STB from direct sunlight and keep it away from sources of intense heat.
 Install the STB in a well-ventilated position, and avoid humid and dusty places.
 Use a soft cloth to clean STB surface. Never use alcohol, gasoline, or other
organic solvent.
 Do not place the STB in any location that is subject to strong pressure, striking, or
vibration.
Tips on Making Repairs
 Do not damage the warranty tag when removing the STB cover.
 Do not allow unqualified personnel to remove the STB cover. This is to avoid
damage to the internal circuit.
 If repair is required, contact the local service center.
 If parts replacement is required, ensure that service technicians use the parts that
are specified by the manufacturer and have the same characteristics as the original
parts.
Precautions
Step 1 Connect Cables
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
Connecting your TV directly to the Audio/Video output of your STB will assure a more vivid
picture and enhance your viewing enjoyment.
Notice:


This product incorporates copy protection technology that is protected by U.S. patents and other
Intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are
Prohibited.

Step 2 Start the STB
STB User Guide
1
2
DVB
RF input
2. Turn on the power switch of the TV and select the correct video input mode.
TV
AV
HDMI
Connect the ,
choose the TV or AV.
Connect the ,
choose the HDMI.
1. Verify that the power cable of the STB is properly connected.