MateView GT User Guide-(01,en-us,zhuque)
Table Of Contents
- Contents
- About this document
- Appearance and ports
- Setting up the monitor
- Wall Mounting
- •An optional wall mount can be used with your device. Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the device. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the device to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. Please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connecting to external devices.•Prevent the holes on the device from being blocked by any objects and leave a space of more than 10 cm around the device for heat dissipation.•Disconnect the power before moving or installing the device. Failing to do so may result in electric shocks.•Remove the stand before installing the device on a wall mount by following the steps for stand attachment in reverse.•If you install the device on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized wall mount and contact your local dealer or qualified personnel. Otherwise it is not covered by the warranty.•Do not over tighten the screws as this may cause damage to the device and void your warranty.•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.•Use screws and wall mounts that meet the following specifications. Any damages or injuries resulting from misuse or using improper accessories are not covered by the warranty.
- ModelZQE-CAAZQE-CBAScrewDiameter (mm)M4M4Length (mm)When wall mount thickness is 2mm1010Quantity44VESA screw hole specs (A x B) in millimeters100 × 100100 × 100
- Connecting the monitor to a device such as a computer
- Setting the OSD menu
- Safety information
- Legal Notice
- Copyright © Huawei 2021. All rights reserved.
- Trademarks and Permissions
- Notice
- DISCLAIMER
- Import and Export Regulations
- Privacy Policy
- For More Help
- ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
Connecting the monitor to a device such
as a computer
• The device does not come with certain components and cables and you need to
purchase them separately.
• Standard cables vary depending on the monitor model.
Open the protective cover on the bottom part of the monitor rear to view the ports. You can
connect the monitor to a device such as a computer based on the cable type.
• You will see a monitor nameplate attached under the ports and information such as
S/N on the nameplate.
• After the cables are connected, we recommended that you arrange the cables and
reinstall the protective cover to prevent dust from entering the ports.
• You can adjust the tilting angle and height of the monitor as required.
DP or HDMI cable connection
1 Connect one end of a DP or HDMI cable to the DP or HDMI port on the monitor, and
connect the other end to the DP or HDMI port on a computer.
If you want to use the microphone of the ZQE-CAA monitor, you also need a USB-C to
USB-A cable to connect the monitor to the computer.
2 Connect other cables such as power cables for the monitor and computer and then power
on the monitor and computer. If the monitor screen is turned on, it indicates that the
connection is successful.
9