MateView GT User Guide-(01,en-us,zhuque)
Table Of Contents
- Contents
- About this document
- Appearance and ports
- Setting up the monitor
- Wall Mounting
- •An optional wall mount can be used with your device. Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the device. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the device to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. Please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connecting to external devices.•Prevent the holes on the device from being blocked by any objects and leave a space of more than 10 cm around the device for heat dissipation.•Disconnect the power before moving or installing the device. Failing to do so may result in electric shocks.•Remove the stand before installing the device on a wall mount by following the steps for stand attachment in reverse.•If you install the device on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized wall mount and contact your local dealer or qualified personnel. Otherwise it is not covered by the warranty.•Do not over tighten the screws as this may cause damage to the device and void your warranty.•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.•Use screws and wall mounts that meet the following specifications. Any damages or injuries resulting from misuse or using improper accessories are not covered by the warranty.
- ModelZQE-CAAZQE-CBAScrewDiameter (mm)M4M4Length (mm)When wall mount thickness is 2mm1010Quantity44VESA screw hole specs (A x B) in millimeters100 × 100100 × 100
- Connecting the monitor to a device such as a computer
- Setting the OSD menu
- Safety information
- Legal Notice
- Copyright © Huawei 2021. All rights reserved.
- Trademarks and Permissions
- Notice
- DISCLAIMER
- Import and Export Regulations
- Privacy Policy
- For More Help
- ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
USB-C to USB-C cable connection
• This connection only applies to ZQE-CAA monitors.
• It is recommended that you use the USB-C to USB-C cable delivered with the monitor.
If a non-standard cable is used, some features may be unavailable.
• The USB-C port of an external device must be a port that supports display, data
transmission, and charging.
• This connection supports charging connected devices, such as laptops or phones.
Connecting to a computer
1 Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a computer.
In this connection, you can use the microphone of the monitor.
2 Connect other cables such as power cables for the monitor and computer and then power
on the monitor and computer. If the monitor screen is turned on, it indicates that the
connection is successful.
Connecting to a phone/tablet
1 Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a phone/tablet.
2 Connect the monitor to a power supply and press the 5-way directional button upward to
power on the monitor. The screen of the phone/tablet will then be projected on the
monitor. When you perform operations on the phone/tablet, its screen will be
synchronously displayed on the monitor, allowing for a large-screen browsing experience.
Connecting the monitor to a device such as a computer
10