User Guide

Great! Your is all set!
Now let’s run a test.
Press the service button to test the connection. A blue
light indicates a good connection. If you see a red light,
please try to activate the device again or call our
customer support at [phone] for assistance.
Continue
Let’s do a testing!
Press the service button located on the side of
the unit. If properly connected, y
our HUB6 Alert
should flash blue light.
Red light indicates errors and you may need to
reinstall your HUB6 Alert.
Good connection
Test failed
You may need to reinstall this device
Add a Device
9 41