A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 Component Parts A Canopy B Canopy Cover Plate C Cap D Threaded Nipple E Lock Nut F Ground Screw G Cupped Washer H Fixture I Support/Supply Cable (2) J Gripper (2) K Glass L Thumb Screw MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 To Install Fixture (Figure 2) 1. Locate the positive (+) label on top of the fixture (H). 2. Align the positive (+) sticker on the fixture (H) with the positive (+) sticker on the gripper (J). 3. Push the support/supply cable (I) from the positive (+) side of the fixture (H) into the positive (+) gripper (J). Push the cable in far enough so that it exits the side of the gripper. 4.
A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 To Install Glass (Figures 3 - 6) 1. Locate glass (K) and use Figure 3 to determine starting orientation for glass installation. 2. Figure 3 shows the fixture (H) and glass (K) from above. Orient glass as shown and place Point 1 in the location shown in Figure 3. Glass should be above both slots but below the LED housing as shown in Figure 4. 3.
A547 ASSEMBLY & INSTALLATION INSTRUCTIONS Venn Pendant 137730 POINT 1 K POINT 2 SLOT 1 (Figure 5) L H H SLOT 3 K POINT 1 (Figure 4) K POINT 2 (Figure 6) If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product. We hope you enjoy your fixture! * Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
