B392 ASSEMBLY & INSTALLATION INSTRUCTIONS Vela Sconce 203330 42338 1 OF 4
B392 ASSEMBLY & INSTALLATION INSTRUCTIONS Vela Sconce 203330 Component Parts A Fixture B Mounting Bracket C Anchors (4) D #10 Scews (4) E Ground Screw F Cupped Washer G #8 Screws (4) H Socket I B Type Bulb (Not Included) J Glass K O-Ring L Socket Cup 42338 2 OF 4
B392 ASSEMBLY & INSTALLATION INSTRUCTIONS Vela Sconce 203330 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
B392 ASSEMBLY & INSTALLATION INSTRUCTIONS Vela Sconce 203330 To Install Glass (Figure 2) 1. Unpack glass (J) and locate o-ring (K), found in kit bag. 2. Stretch o-ring (K) over one end of glass (J). Leave just slightly up from bottom of glass (See figure 2). 3. Install B type bulb (I) (not included) into socket (H) . J 4. Place glass (J) over the B type bulb. 5. Slide glass (J) and o-ring (K) into socket cup (L) until it hits bottom of cup. Note: Be sure o-ring slides into cup.
