Installation & Assembly

ASSEMBLY & INSTALLATION INSTRUCTIONS
Nest Semi-Flush 128720
A580
43151
To Install Fixture (Figure 1)
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY
OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be
installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of
the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products.
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX PRIOR TO INSTALLATION.
1. Carefully unpack xture (A) from
the carton.
2. Thread the threaded studs (C)
into the crossbar (B) in the
locations that line up with the
holes in xture.
3. Using two machine screws (not
provided), fasten the crossbar (B)
to the electric box.
Note: A new electric box comes
with screws. When replacing a
fixture, retain the existing screws
for use with the new fixture.
4. Attach safety cable (E) to
crossbar (B) using ground screw
(D). The weight of the xture
can now be supported by safety
cable (E).
Note: The safety cable also acts
as a ground wire for the xture.
5. Using suitable wire connectors
(not provided) connect fixture
wires to supply (white to white
and black to black). Connect all
ground wires (bare copper or
green to bare copper or green).
Push wires back into electrical
box.
3 OF 4
H
F
C
B
D
A
G
MACHINE
SCREWS
BULB
E
CAUTION: MAKE SURE WIRE
CONNECTORS ARE TWISTED ON
SECURELY AND NO BARE WIRE IS
EXPOSED.
I